Installing a kegerator under a countertop is not as difficult as it sounds, but should not be taken lightly. First, you will need to choose a suitable area for the kegerator to be installed. It should be located in an open space where the temperature will remain relatively consistent.
The flooring should be made of a more sturdy material to help support the kegerator’s weight. Next, you will need to measure the area to make sure the kegerator will fit properly. You’ll also want to measure the height of the countertop in order to ensure that the kegerator fits with plenty of clearance beneath.
Once you have determined the area, you will need to find the necessary components to install the kegerator underneath. This includes an airflow device, an insulation jacket, a tower kit, and a drain pan.
The air flow device and insulation jacket will help to regulate the temperature while the tower kit and drain pan will prevent any mess or spills. You may also want to purchase some additional pieces in order to enhance the kegerator’s performance.
After collecting all of the parts and equipment, you should begin to assemble the kegerator by attaching the outside case to the inner components. The tower, coils, and lines should then be connected and the insulation jacket attached.
Once all of the components are in place, the airflow and drain pan will be set up, and the kegerator can be plugged in and turned on.
Finally, you can then start to install the kegerator under the countertop. You should use bolts or screws to attach the kegerator and make sure everything is secure. Once the kegerator is firmly in place, you can begin to pour the beer, and enjoy!.
Can I put a kegerator in a cabinet?
Yes, you can put a kegerator in a cabinet. Depending on the size of your kegerator, you may need to make sure that the cabinet you choose is large enough to allow for the kegerator to fit snugly. There should be adequate ventilation within the cabinet so that the kegerator can keep cool.
You will likely need to make some modifications to the cabinet to accommodate the kegerator and other equipment, such as a CO2 tank, beer lines, and taps. The refrigerator should be sitting in an area where there is enough space for the door to open, and any other equipment such as a drip tray, that you may need.
Depending on the type of cabinet you get, it may be necessary to add additional insulation and cooling to the enclosure. It is also important to make sure that the power cord and beer lines are kept clear and away from any areas where they could be in risk of getting damaged.
With the right modifications and attention to detail, you can safely and easily install a kegerator in a cabinet.
How much ventilation does a kegerator need?
A kegerator should have proper ventilation to ensure optimal performance. The amount of ventilation required will depend on the size and efficiency of the kegerator, as well as the ambient temperature of the area it is located in.
Generally speaking, a kegerator should have adequate ventilation to allow for a temperature control system or evaporative cooling. This typically involves having a minimum 1/4″ gap for proper air circulation and exchange.
In order for the kegerator to cool properly, the fans should be located at the back and the front. If the kegerator is located in a confined space, then more powerful and more fans should be used to help ensure that the kegerator is getting adequate ventilation.
It is also important to ensure that the fans are not located in direct sunlight, as this can cause the kegerator to overheat.
Is it worth having a kegerator?
Whether or not having a kegerator is worth it really depends on the individual. For someone who is a fan of draft beer, a kegerator is a great way to enjoy the convenience and affordability of having fresh beer on tap at home.
With a kegerator, you can enjoy the perfect pour of beer anytime you feel like it, without having to worry about lugging home heavy cases or bottles of beer. Additionally, the small size of kegerators means that you won’t have to sacrifice too much in terms of your kitchen or home bar space.
While kegerators can be cost-effective in the long run, they could be a costly investment for some. For those who are only occasional beer drinkers, a kegerator may not be cost-effective, as you would need to buy large amounts of beer to keep in your kegerator.
Additionally, the initial cost for kegerators can range from a few hundred dollars to a few thousand, depending on the size and features.
If you love beer and don’t mind making an investment, having a kegerator could be worth it as it can be a great way to enjoy draft beer at home.
Which is better keezer or kegerator?
When deciding whether a keezer or kegerator is the better option for you, it is important to consider several factors. The keezer and kegerator both store beer and other beverages at the perfect temperature and pressure and are designed to keep beverages cold and dispense them to perfection.
The primary difference between a keezer and kegerator is that a keezer is a modified chest freezer, and a kegerator is a modified refrigerator. A kegerator will usually have more features such as digital temperature readouts, built-in CO2 regulators, and drip trays.
However, a keezer can be modified with a draft tower and other features, and you have the option to add more taps and expand the capacity to store more beer with a keezer.
Overall, it comes down to what your needs and preferences are. If you’re looking for more ease of use, a kegerator may be the better choice for you, especially if you want a lot of features. However, if you want more flexibility and capacity, then a keezer might be the better choice.
Can you make a kegerator out of a chest freezer?
Yes, you can make a kegerator out of a chest freezer. This can be a great way to save space because you don’t need a separate refrigerator and freezer unit to store your draft beer. To begin, you will need to measure the space inside your chest freezer to ensure that the keg, CO2 tank and all associated lines will fit.
Then, make sure to clean and sanitize the freezer, including the interior walls, before installing the kegerator parts. Next, decide on the type of shank and faucet setup you will be using for your kegerator.
After that, you can begin building the kegerator using the necessary parts, including the ball-lock connectors, shank, faucet, a CO2 regulator, a CO2 tank and a keg coupler. To finish, the CO2 tank and shank assembly should be securely attached to the outside of the chest freezer, while the keg and keg coupler should be securely placed inside.
Once everything is connected and ready to go, you are ready to start pouring perfect draft beer from your chest freezer-turned-kegerator.
What do I need to build a kegerator?
In order to build a kegerator, you will need a few basic supplies and tools:
1. An empty refrigerator or freezer, preferably one that is slightly larger than the size of the keg you will be using. If you are wanting a two tap system, two kegs, two lines and two taps will be required.
2. A temperature controller or temperature tap to regulate the temperature of the kegerator.
3. A carbon dioxide tank and regulator, including the necessary air lines and gaskets to attach and seal the keg.
4. A project box enclosure and outlet strips for the digital temperature controller, as well as other electrical components.
5. Temperature gauge, beer faucet, beer tower, and all other hardware necessary for a fully functioning kegerator.
6. The most important item you will need is the beer keg, appropriate beer coupler, and all necessary beer accessories.
7. Lastly, the optional tools needed to complete your kegerator include a drill, screwdriver, hammer, wire stripper, and a pair of pliers.
How do you make a keezer bar?
Making a keezer bar requires a bit of planning and a few simple steps. The first step is to decide how large your keezer bar will be and what specific features you would like in it. The size of the bar depends on the amount of beer you would like to store in it and the available space that you have.
You can choose to have a basic bar with a drip tray, a single or multiple taps, or any other features that fit your needs.
Once you have determined the size and features, it’s time to begin construction. A good place to start is by acquiring a keezer cabinet or building one based on your desired measurements and features.
This can be done with a variety of materials such as wood, metal, or even an old refrigerator. Be sure to investigate the building codes in your area to ensure that your project meets all legal requirements.
Next, you will need to cut a hole in the top of the cabinet for the taps, the drip tray, and any other features that you wish to install. Then connect a cold plate system to the bottom of the unit, which will keep the beer cold.
Once that is complete, it’s time to attach the taps and other components to the top of the cabinet.
After the cabinet is assembled and the components are attached, it’s finally time to put the beer inside the kegerator and finish your homemade keezer bar. Start by rinsing each keg thoroughly to remove any contaminants and then place the kegs into the kegerator.
Fill the kegs with the beer of your choice and then attach the hoses and any other necessary components. Now your keezer bar is ready to go. Once your keezer bar is complete, be sure to keep it well maintained to extend its life and get the most out of your beloved bar.
How much room do you need for a kegerator?
This is a difficult question to answer as it depends on the size, capacity, and features of the particular kegerator you are considering. In general, you should plan for a kegerator to take up about 2 1/2 square feet of floor space.
It is important to measure the floor space where the kegerator will be located before you make a purchase. Also, some kegerators may have special requirements, such as allowing for a venting system or needing extra space to accommodate a CO2 tank.
Additionally, if you plan to store any additional items associated with the kegerator, you will need to factor in the extra space needed for these items. Ultimately, the space requirements of the kegerator you are purchasing should be the first determinate you consider in order to ensure you have enough space to utilize and enjoy your kegerator.
How do you build your own kegerator and install it in your countertop?
Building your own kegerator and installing it in your countertop can be a fun project, but it also involves a significant amount of work. Before you begin, make sure that you have a reliable and safe work area to work in, as well as the correct safety equipment and materials.
First, you will need to purchase a small refrigerator or freezer. Make sure that the refrigerator or freezer you purchase is large enough to fit the keg that you intend to store. Next, measure the size of the keg and compare it with the interior of the refrigerator to ensure that it will fit properly.
Once you have determined the correct size of refrigerator, make sure to cut a hole into the upper portion of the refrigerator to make room for the beer tap. Make sure to measure the area carefully to ensure that the hole is the right size and that it is sealed around the edges.
Once the hole is cut, you will need to secure the beer tap to the refrigerator. For this, you can use screws to properly secure the tap to the refrigerator wall.
You will then need to install the gas line. Measure the area where you are running the gas line, and look for a good place to secure the CO2 tank. Place the tank in the designated spot near the keg, and use an adapter to connect the CO2 tank to the beer tap.
You will also need to make a drip tray for the beer tap. For the tray, you will want to use a tin sheet that is slightly larger than the beer tap. Make sure to seal the edges of the tray with waterproof cement to ensure that any liquids do not leak through.
Place the tray underneath the beer tap and make sure it is secure.
Finally, you will need to connect your kegerator to an outdoor power supply. Make sure to use a power cord that is long enough to reach an outdoor power source, and that is rated appropriately. Connect the power cord to the outlet, and make sure to test the sink with water to ensure it is securely attached and that it works properly.
By following these instructions, you should know how to build and install your own kegerator in your countertop. Make sure to take your time and use safety precautions throughout the entire process.
How can I make a cheap kegerator?
Making a cheap kegerator requires a bit of creativity and handiness.
First, you will need to purchase a mini-fridge (a chest-style fridge is best; expect to pay around $100). Make sure it is large enough to fit the size of the keg you plan to use and that it can hold the necessary temperature range.
Next, you’ll need to consider the method for tapping the beer. Including manual pump systems and CO2 systems, which will be the most expensive part. If you’re looking to save a bit of money, a plunger-style beer dispenser such as G (available between $30-40) is a good option.
Once you have your equipment, you’ll need to install the hardware. Remove the door of the mini-fridge, drill the holes to mount the hardware and paint the taps if you want them to match. Connect the beer line to the tap and attach the CO2 regulator.
Turn on the CO2 and you’ll be ready to serve!.
Finally, fill the keg with your favorite beer, leave it to settle and then enjoy. Remember to clean the fridge before you start and to keep it clean throughout to ensure optimum beer taste and quality.
How much does it cost to make a kegerator?
The cost of making a kegerator will depend on what type of kegerator you decide to build and the components used in the build. Basic builds can range from under $200 to over $1000. Your most basic build consists of an old refrigerator, CO2 tank, regulator, and conversion kit.
Depending on the make and model of the refrigerator, cost could range from $60 – $150. The CO2 tank should cost between $50-$100 depending on the size, the regulator should be around $30-$50 and the conversion kit should cost between $45-$80 depending on the specific parts included.
All additional parts and materials (additional tap systems, ornamental additions, additional upgrades) would depend on the extras added on and of course can add up quickly. On the higher end of things, you can find customized models pre-built and ready to go which can range anywhere from $500 to $1000 depending on the type and material of the model.
All in all, the cost of a kegerator will depend on the amount of customization and parts you use, but regardless of the cost, you can enjoy the perfect pint of beer at home.
Should CO2 tank be inside kegerator?
No, CO2 tanks should never be placed inside a kegerator. The extra pressure from the cold environment within a kegerator can cause your tank to over pressurize and become a safety hazard, including the potential risk of explosion.
Furthermore, keeping the tank inside the kegerator limits the distance of the beer line and makes checking the CO2 regulator more difficult, thereby reducing the accuracy of carbonation.
The best practice is to place your CO2 tank and regulator in a cool, dry place outside of the kegerator such as a basement or closet. This will maintain the accuracy of the CO2 regulator, reduce the risk of unsafe tank pressure, and provide enough distance between the beer line and CO2 tank to ensure the beer is properly carbonated and safe to drink.
In summary, you should never place your CO2 tank inside a kegerator as it is a potentially dangerous and inaccurate practice.
Can I use a chest freezer as a kegerator?
Yes you can use a chest freezer as a kegerator. First, you need to make sure that the chest freezer has the necessary space for a beer keg. Generally, a five gallon keg should fit comfortably in a standard small chest freezer.
If you need extra space, a larger chest freezer may be necessary. Once you have the correct size chest freezer, you should adjust the temperature settings so that it is between 33-38°F. This will ensure that your beer is stored at optimal temperatures.
Once the desired temperature is reached, you can install the draft tower of your kegerator and the CO2 tank. Then, you can add the beer keg and enjoy your new kegerator.
