Skip to Content

How do you turn a chest freezer into a kegerator?

Turning a chest freezer into a kegerator is actually a fairly straightforward process. First, you will need to purchase a temperature controller, kegerator conversion kit, and any taps, hoses, and additional components you would like to have.

Next, you will need to prepare the chest freezer for the kegerator conversion. Unplug the freezer and remove all existing items inside. Clean the inside of the chest freezer using a mild detergent and water.

Once it is clean and dry, install the temperature controller and conversion kit according to the manufacturer’s instructions.

Now, you will need to install and connect the taps and hoses to the keg coupler. Make sure your connections are airtight by tightening the screws with a wrench. Finally, attach the gas lines to the regulator and turn on the gas.

Once all of these steps are complete, you can begin to temperature condition the freezer by setting the temperature controller to the desired temperature. Let the freezer sit for several hours and then check that the temperature is correct.

Once the temperature is correct, you are ready to fill your kegs and start serving cold beer!.

What size chest freezer do I need for a kegerator?

A kegerator is a great addition to any home bar, and if you’re a beer lover, it’s a must-have. But before you can start enjoy fresh, cold beer on tap, you need to choose the right chest freezer for your kegerator.

Here are a few things to consider to help you make the best decision:

1. The size of your keg. A standard keg is about 15.5 gallons, so you’ll need a freezer that can accommodate that size.

2. The number of kegs you want to store. If you want to store more than one keg, you’ll need a larger freezer.

3. The type of beer you plan on serving. Some beers require a higher serving temperature than others, so you’ll need to take that into account when choosing your freezer.

4. The space you have available. Make sure you measure the space where you’ll be placing your kegerator before you buy a freezer. You don’t want to end up with a freezer that’s too big or too small for the space.

5. Your budget. Chest freezers can range in price from a few hundred dollars to a few thousand, so it’s important to set a budget before you start shopping.

Now that you know what to look for, you’re ready to start shopping for the perfect chest freezer for your kegerator. Be sure to check out our selection of chest freezers to find the perfect one for your needs.

Can I drill holes in chest freezer?

Yes, you can drill holes into a chest freezer if you need to. It is important to take safety precautions when doing so, including wearing safety goggles, a face mask, and gloves. Additionally, you should make sure to use the proper drill bit for the material of the freezer.

For best results, try to drill at a slow and steady pace. When not in use, make sure to cover the holes with insulation to prevent cold air from leaking out and warm air entering the freezer.

What is inside chest freezer walls?

The inside of a chest freezer is typically made of a thick layer of foam insulation sandwiched between two layers of metal. The foam insulation is usually made up of material such as polystyrene or polyurethane, which acts as a thermal barrier to keep the cold air inside.

This insulation keeps the internal temperature of the freezer as consistent as possible. Additionally, there is typically a varying thickness of plastic coating on the interior walls of the chest freezer that helps to protect the insulation from moisture and potentially damaging factors, such as corrosion.

Finally, the walls of the chest freezer may also contain a small air pocket, which helps circulate cold air around the freezer and prevent the bottom of the freezer from becoming too cold.

Where are the cooling lines in a chest freezer?

The cooling lines in a chest freezer are usually located near the back or bottom of the unit. If your model has a rear-mounted compressor, then the evaporator coil and cooling lines will be below it.

If your model does not have a rear-mounted compressor, the evaporator coil and cooling lines will be located near the bottom of the chest freezer. If you cannot locate the coils and lines, consult the user’s manual that came with the unit.

In addition, be sure to inspect the lines and coil closely during your regular cleaning and maintenance. This will ensure that the refrigerator stays in optimal condition and is free of debris, which could inhibit airflow and cause your freezer to work overtime to keep cool.

Doing this maintenance also helps prevent unexpected repair costs in the future.

What happens if you poke a hole in a freezer?

If you poke a hole in a freezer, it can be a serious issue as doing so can cause the refrigerant in the freezer to be released. Refrigerant is a chemical that facilitates heat transfer, and it is essential in maintaining proper temperatures inside the freezer.

If the refrigerant begins to escape, your food can spoil more quickly and the interior of the freezer may become too warm. There is also the potential for the release of hazardous chemicals if the refrigerant is of an older type.

Additionally, if the refrigerant leak is not immediately addressed it can become more expensive to repair as the risk of component failure increases. It is best to call a professional technician to assess the situation and prevent further damage.

Will silicone work in a freezer?

Yes, silicone can be used in a freezer. Numerous silicone products are designed specifically to be used in freezers, such as freezer-safe storage containers, ice cube trays, and wraps for protecting food.

Silicone has a low thermal conductivity, meaning it does not conduct heat well, which makes it a perfect material for use in freezer environments. It also has a wide temperature range and can be used from -40°F (-40°C) to 446°F (230°C), meaning it can handle extreme cold and extreme heat.

Additionally, silicone is flexible, making it easy to shape into a variety of products and resistant to cracking or leakage in low temperatures. In regard to safety, silicone is free of dangerous chemicals and does not leach into food or water, making it ideal for use in the freezer for long-term use.

Can you put kegs in the freezer?

It is possible to put kegs in the freezer, but it is not recommended. When beers are put in the freezer, the liquid absorbs the cold temperatures, expanding and putting pressure on the seals of the keg.

If done too frequently, this can cause the seals to break, resulting in beer leaking out. This will not only cause a mess, but it will also reduce the shelf life of your beer. Additionally, it is difficult to get a consistent temperature in a freezer, which can affect the quality of the beer.

Therefore, it is best to avoid storing them in the freezer. Instead, try storing them in a cool, dark place with consistent room temperature to keep your beer in the best possible condition.

What is the capacity of a chest freezer?

The capacity of a chest freezer varies depending on the size and model. Generally, chest freezers range from 2.8 to 22 cubic feet in size. The capacity is usually indicated on the box, in the user manual, or on the product description on the store website.

Smaller chest freezers are ideal for storing a few items like treats or a meal, while larger capacity models are great for stocking up on frozen food or bulk food items. Chest freezers are also great for long term storage and are usually more energy efficient than upright freezers.

For larger families or for larger amounts of frozen foods, selecting a chest freezer with a greater capacity can provide more space. It is recommended to select a chest freezer with a built-in thermostat to ensure that you always have the right temperature for storing food.

How many kegs does a keezer hold?

The number of kegs that a keezer can hold depends on the size and type of keezer you have. For a standard off-the-shelf 15” wide keezer, you should be able to fit four 1/6 size kegs, three 1/4 size kegs, or two 1/2 size kegs in most standard size and depth keezers.

If you have a custom-made keezer, then you may be able to fit more kegs depending on the size and type of keezer. Furthermore, you can also fit additional kegs if you use shorter-profile kegs. For example, a standard-height Corny keg is 28″(h) x 9.

5″(d), but a “shorty” version of the same keg is 20.5″(h) x 9.5″(d). Therefore, you may be able to fit multiple “shorty” kegs into a keezer instead of one regular-sized keg.

How many kegs will fit in a 5 cubic foot freezer?

It depends on the size of the kegs. If the kegs are standard half-barrel kegs, you would fit about 2 of them in a 5 cubic foot freezer. However, if the kegs are more compact quarter-barrel kegs, you could potentially fit up to 5 in the same freezer.

Unless you plan on using the freezer for something else as well, though, it’s generally suggested to keep it at two kegs for best cooling efficiency. Of course, this assumes that the freezer you have will not be accommodating more than two kegs at a time.

If you need to store more kegs than this, you may need to look into acquiring a larger freezer.

How can I make my chest freezer look better?

The most obvious one is to give it a good cleaning. Remove any food or items that may have spilled, and use a warm, soapy solution to wipe down the inside and outside of the freezer. Vacuum out any debris and dust, and be sure to keep it clean to maintain its appearance.

You can also give your chest freezer a makeover by repainting it or applying adhesive contact paper. For repainting, choose a color that fits with your existing decor, and use a paint specifically made for appliances.

If you go with contact paper, pick out a pattern and measurements that match your freezer and apply it like regular wallpaper.

To further improve the look of your freezer, incorporate it into your decor by adding items like a basket of magazines or books, a vase with flowers, and wall art or shelves around it. You can also accessorize it with stickers, labels or even stickers with meaningful reminders to help keep you organized.

How many kegs do I need for a 125 person wedding?

For a 125 person wedding, you will likely need between 4-7 kegs of beer, depending on how long the wedding will last and the type of beer being served. Generally, it is recommended that you plan for approximately 1/2 barrel (15.

5 gallons, or around 225 12-ounce pours) of beer per every 40 guests. In other words, you should plan for 3.13 barrels (or 34.5 gallons or 529 12-ounce pours) of beer for your 125 guests, though you may increase or decrease according to your preferences or the duration of the wedding.

Additionally, it is advisable that you take the size of each keg into consideration and select the number of kegs accordingly. For example, if the beer being served is popular and the duration of the wedding is long, it may be more cost-effective to purchase 5 pint-sized kegs instead of 4 regular-sized kegs.

In conclusion, for a wedding of 125 guests, you should plan on purchasing between 4-7 kegs of beer, depending on how long the wedding lasts and the type of beer being served. Finally, consider the size of each keg when deciding how many to buy.

How many pints are in a sixtel?

A sixtel is a unit used to measure beer and equals 1/6 of a standard US beer barrel, which equates to 5.16 US gallons or somewhere around 41 pints. A sixtel is a perfect size for small bars, restaurants, or home brewing.

A sixtel is also known as a log, torpedo, or Stubby Quarter Barrel.

What do I need to make a keezer?

To make a keezer, you will need the following basic supplies:

– A chest or upright freezer (at least 5 cubic feet, for a single-tap keezer).

– A drill with a hole saw, screwdriver, and wrench (for the shank and faucet installation).

– A stainless steel draft tower with a shank and faucet.

– An air-cooled glycol chiller, or a plate chiller.

– A CO2 regulator and tank.

– Tubing to link the draft tower to the glycol chiller/plate chiller.

– Tubing to link the CO2 regulator to the draft tower.

– An edge trim to finish the edges of the freezer lid and tower.

– A temperature controller (to control the temperature of the glycol chiller).

– Foam sealant (to ensure the lid of the freezer stays sealed).

– Keg(s) of your favorite beer.

Optional extras:

– A secondary CO2 regulator (to serve different types of beer on different PSIs).

– A drip tray (for easy cleaning).

– An air compressor/controller (for cold crash purposes).

– A beer gun (for bottling from the keezer).

– A keg coupler (to give you more control over the serving pressure).

– Stainless steel taps (for better visual appeal).

– A cleaning kit (to keep your draft system sanitized).

– A beer filter (to clarify your beer before serving).

– An insulation kit (for convenience and to improve cooling efficiency).

Which is better keezer or kegerator?

When deciding between a keezer and a kegerator, there are many factors to consider. A keezer is essentially a modified chest freezer that can be used to dispense draft beer and dispense a variety of other beverages.

It typically includes a number of features that a kegerator may not have, such as shelves for cans or bottles, and a dedicated spot to mount a CO2 tank. A keezer is also typically larger than a kegerator, allowing for more room to store and dispense additional kegs.

On the other hand, a kegerator is a dedicated beer dispensing refrigerator that can typically handle up to four kegs. Though it almost always has fewer features than a keezer, it is often less expensive, easier to install and some models can be self-cleaning.

Additionally, the exterior of a kegerator often has a striking visual design which can be attractive in a home.

In the end, which is better depends largely on the individual and their preferences. If someone is looking for a smaller, lower cost option that still looks great, then a kegerator would be the logical choice.

Alternatively, if someone is looking for a larger, more versatile option with additional features, then a keezer is more likely to be the best option.

Will a half keg fit in a kegerator?

Yes, a half keg will fit in a kegerator. Many kegerators come with a fitting that allows for a half keg, although the size and design of the unit can vary greatly. Kegerators typically have enough room for a standard-size half keg, which is typically about 16-21 inches high and 16-17 inches in diameter.

If a half keg is going to be regularly used in a kegerator, it’s important to check the space available and choose a unit that will be able to accommodate the keg size. Additionally, some kegerators may require additional fittings or pieces to hold the keg in place, such as a shroud or a collar, depending on the size and design of the unit.

How much beer is in a kegerator?

The amount of beer that can be stored in a kegerator will depend on the size of the keg and the size of the kegerator itself. Standard full-size kegs are commonly referred to as a “half-barrel” or “quarter-barrel,” with a full-size keg containing approximately 15.

5 gallons or 1,984 ounces of beer. If a kegerator is large enough to fit a full-size keg, it will be able to store up to 1,984 ounces of beer. If a kegerator is designed to store the smaller, “pony-size” kegs, they will usually hold only up to 5 gallons of beer or 640 ounces.

The size of the keg will usually be noted in the product description of many kegerators.

What are the dimensions of a half keg?

A half barrel, or half keg, is a 15.5 gallon container. It typically holds around 1,984 ounces of liquid, equivalent to about 165 12-ounce cans or bottles of beer. In general, a half keg is 16 inches in diameter and 23.

3 inches in height. The container itself weighs 26.5 pounds, while the bag of ice used to chill the contents weighs an additional 20.5 pounds. The standard U. S. half barrel requires a tap or tap system to pour its contents.