Turning a mini fridge into a keg requires a few steps. First, buy a plastic keg shell that is the same size as your mini fridge, and make sure to buy the appropriate tap kit and keg lid to fit. Next, take the door and shelves out of the mini fridge and place the keg shell inside of it.
Seal the lid onto the top of the keg using a rubber gasket, and make sure the tap is securely fastened near the bottom. If you want to, you can now wrap the mini fridge in any type of material to give it a more finished look, like wrapping paper or vinyl.
Once the keg is securely in the mini fridge, you will need to attach the CO2 tank regulator and the CO2 line to the keg. Attach the regulator to the CO2 tank, and then attach the other end of the line to the keg lid.
Make sure the regulator is set to the correct pressure for your particular beer, based on your beer’s packaging or directions from a beer expert. Once everything is set up, you can begin transferring your beer to the keg and you’re all set!.
Will a beer keg fit in a fridge?
It is possible to fit a beer keg into a refrigerator, however, it will depend upon the size of the fridge and keg. Many full-size refrigerators with top-mount freezers can comfortably fit a full-size beer keg.
However, if you have a smaller refrigerator with a bottom mount freezer or a mini-fridge, it may not be possible to fit a full-size keg. In these cases, you may be able to purchase a smaller 5-gallon keg and a portable, mini-fridge-style tap system.
Additionally, there are kegerator systems available on the market that are designed to fit inside a fridge, and act as a combination refrigerator and beer dispenser. Ultimately, whether or not you can fit a beer keg in your fridge will depend on the size of your fridge and the size of the keg you are looking for.
What size kegs fit in a kegerator?
Kegs are available in a variety of sizes, with the most common being the 1/2 barrel (full-size) keg, 1/4 barrel (pony) keg, and 1/6 barrel (sixtel) keg. All of these sizes fit in a standard single-tap kegerator and can be used to dispense draft beer.
The dimensions of the kegs are as follows:
1/2 barrel (full-size) keg: 16.5″ diameter by 25.25″ height
1/4 barrel (pony) keg: 13.7″ diameter by 25.9″ height
1/6 barrel (sixtel) keg: 11″ diameter by 22.5″ height
Most kegerators are built to accommodate all three sizes of kegs and the shelves in the interior can be adjusted to the height of the keg. Many kegerators are also equipped with an extra tower for a smaller keg, or a specialized tower for mini kegs, which are even shorter versions of the sixtel.
Mini kegs are often used for homebrew beer as well as smaller keg batches from craft breweries.
Given their size, it is also possible to stack two 1/4 barrel kegs, a 1/2 barrel and a 1/4 barrel, or two 1/6 barrel kegs inside a kegerator. When utilizing this option, it’s important to make sure to evenly distribute the weight and make sure the weight is not exceeding the maximum load capacity of the kegerator.
What is the smallest keg size?
The smallest keg size is a mini keg, which typically holds 5 liters (1.3 US gallons) or 1.5 US gallons of beer. This is equivalent to about 10-14 standard pint glasses or seven 16-ounce (imperial pint) glasses.
A mini keg is often seen in European countries, such as Germany, and is sometimes referred to as a “sixth barrel”. The party-sized mini keg is also popular at college parties and other smaller gatherings.
They can easily be stored in a refrigerator, making them perfect for those occasions where there isn’t much storage space available.
Is it cheaper to buy a keg or cases of beer?
It depends on the type of beer you are buying and the quantity. Buying a keg is usually cheaper if you are planning to buy in bulk and you’ll get the most beer for your money. If you just want to try a few different types of beer or not a lot in quantity, then cases may be cheaper.
However, kegs usually come with a tap and a returnable deposit for the container, so this can bring down the cost further. It’s best to shop around to get the best deal.
How long does a keg last once tapped?
Once a keg is tapped, it typically lasts for around 6-8 weeks in optimal conditions, although this isn’t an exact science. The time frame for a keg’s lifespan depends on a few factors, such as storage temperature, the style of beer in the keg, and whether or not it is regularly exposed to air.
If the keg is stored in a cool and constant temperature between 36-38 degrees Fahrenheit and is not exposed to air too often, it can potentially last even longer than 8 weeks. However, beers that are dark or high in alcohol tend to have shorter lifespans, whereas light beers and those with lower alcohol content will typically last much longer.
Beers with more carbonation will typically last less long as well.
To maximize the life of a keg, make sure it is stored in a cool and constant temperature and minimally exposed to air. If a keg is properly maintained, it can potentially last up to 3 months before it starts to lose flavor or quality.
What sizes do kegs come in?
Kegs come in a variety of different sizes, ranging from small, 1/2-barrel kegs up to larger, 1/4-barrel kegs. The standard beer keg size is a 1/2-barrel keg, which holds 15.5 US gallons (59.8 liters) of beer, which is equivalent to 165 12-ounce cans of beer or 124 16-ounce pint glasses of beer.
Smaller 1/4-barrel kegs hold 7.75 US gallons (29.3 liters) of beer, which is equivalent to 82 12-ounce cans of beer or 62 16-ounce pint glasses of beer. Kegs can be rented for special occasions or purchased for personal home use.
There are also mini-kegs, commonly known as ‘growlers’ that come in a range of sizes and are used for carrying beer home from the brewery.
What size is a Pony keg?
A Pony keg is a smaller version of a full-sized keg and is the equivalent of a quarter-barrel. It holds approximately 7.75 gallons or 82 12-ounce servings. A Pony keg is also known as a Stubby Quarter barrel and measures approximately 14-15 inches in height, with a diameter of approximately 9.9 inches.
How much is a pony keg cost?
The cost of a pony keg can vary depending on the type of beer and brewery you are purchasing it from. Generally, a pony keg will range anywhere from $40-$90, but prices can go up to as much as $150 for specialty brews.
Kegs from popular and large distributors may cost less than those from smaller, craft breweries. You can also find specials and discounts from some distributors, so it’s important to shop around to get the best deal.
Additionally, you will have to factor in the cost of tap rental, which can range from $10-$50, depending on the type of tap you use.
How many beers are in a mini keg?
A mini keg, also known as a mini barrel, is a five-liter container of beer, similar in size and shape to the traditional beer keg. A mini keg contains 14 12-ounce beers, equivalent to 1.75 gallons of beer.
Nowadays mini kegs can be filled with a large array of beers, from light ales to dark stouts. While the traditional mini keg is typically made of steel, some brewers have also begun using plastic containers to house their beers.
Many retailers green efforts have also made them available in refillable versions, making them a great choice for consumers looking to reduce their packaging waste.
What size mini fridge do you need to make a kegerator?
The size of mini fridge you need to make a kegerator depends on the size of keg you want to dispense. Most average full-size kegs (also called “half-barrels”) hold 15.5 gallons of beer and require a mini fridge that is at least 4.
4 cubic feet in size. If you opt for the smaller “pony” or “quarter-barrel” size kegs, you can use a smaller mini fridge of around 3.2 cubic feet. Additionally, if you plan on storing cold cans and bottles in your kegerator, you’ll need more space.
Most kegerators also require an internal tower conversion kit, which can also take up internal fridge space. Make sure you measure the area of where you plan to install your kegerator and add several inches for the door to open properly.
How do you make a kegerator out of an old mini fridge?
Making a kegerator out of an old mini fridge is an easy project that can have you pouring a quality draft beer from your own home in no time. To begin, you’ll need a mini fridge where the temperature can be easily adjusted and an older (but still functioning) keg.
The keg must meet the requirements of the fridge size, as too much carbon dioxide can build up and blow out the seals. The equipment that you’ll need includes: CO2 tank, gas regulator, gas line, tap tower, and a faucet.
First, you’ll need to remove the door and some shelving from the mini fridge to create adequate room for the keg. Use a drill to place holes to insert the tap tower and faucet. Make sure to get a tap tower and faucet that can be mounted on the outside of the fridge, making it easier to monitor the system.
Next, the CO2 tank and regulator need to be connected to the keg. Make sure to use the proper safety equipment when handling the gas tanks. Once that’s complete, connect the gas line to the valve at the bottom of the tank and run it up through the top of the keg.
Attach the gas line firmly to the regulator and turn the valve on the regulator.
Finally, set the temperature of the refrigerator to between 37-40 degrees and add the keg to the mini fridge. Attach the faucet to the beer line and make sure to clean it before use. Start pouring a beer, and once it’s served, consider getting a kegerator cleaning kit that contains ingredients, directions and tools to keep your kegerator in top condition.
With just a few simple steps and tools, you can easily turn a standard mini fridge into a full-functioning kegerator. Enjoy the convenience of pouring your favorite beer at home without having to lug cans and bottles from the store.
Is it worth having a kegerator?
A kegerator is a great way to have access to cold draft beer at home. Whether you’re hosting friends or just want to enjoy a cold beer from the convenience of your own home, a kegerator is an excellent way to do it.
Kegerators can bring a unique, upscale atmosphere to your home or business. They offer a much higher quality of beer and an overall more enjoyable drinking experience than the traditional canned or bottled beer usually found in the fridge.
Not to mention, it’s also a great conversation piece with your guests.
Having a kegerator is also cost-effective. Once you buy the unit, you can purchase kegs in bulk, which can save you a lot of money compared to buying individual bottles or cans. You also don’t have to worry about waste from empty bottles, cans, or growlers accumulating and needing to be recycled.
The only downside to having a kegerator is the initial cost. A good model can cost around a few hundred dollars, plus you’ll need to buy the kegs and all of the necessary accessories like gas cylinders, taps, and lines.
However, considering the overall savings and convenience, having a kegerator is worth the cost in the long run.
How long does beer last in a kegerator?
The general consensus on the shelf life of beer stored in a kegerator is that it will last at least three to four months before it begins to lose its flavor and quality. However, the shelf life will depend on the type of beer and the temperature at which it is stored.
Lighter beers such as lagers, pilsners and wheat beers tend to have a shorter shelf life of about one to two months, whereas more heavily hopped beers may last up to four months or longer. The temperature in your kegerator is also a factor, as beers stored at colder temperatures tend to last longer.
The optimal temperature range to maintain in a kegerator is approximately 38-40°F. If the temperature is too cold, it could lead to excess carbonation and a foamy pour, while too warm of a temperature could cause the beer to become sour.
Additionally, it is important to keep the keg cold and away from sunlight to best maintain quality.
Can I drill a hole in my fridge?
The answer to this question is that it depends on the type of refrigerator you have. Depending on the type of refrigerator you have, drilling a hole could be dangerous and may void any warranty you may have.
If you have a top-mount, side-by-side or bottom-mount fridge, drilling a hole in it could potentially damage the internal components of the refrigerator, such as the cooling coils or electrical wiring, which could create a major safety hazard.
Therefore it is generally not recommended to drill a hole in any fridge. Furthermore, if you do choose to drill a hole in your fridge, make sure you are extremely cautious and follow all safety instructions.
It is also essential that you check your refrigerator manual before doing any type of modification or repair.
Which is better keezer or kegerator?
Ultimately, it depends on your needs and preferences. A keezer is a modified chest freezer that has been transformed into a draft beer system. It functions similarly to a kegerator but provides more flexibility as it can often hold more kegs and can be more easily customized.
A kegerator is a purpose-built draft beer system that typically consists of a pressurized refrigerator with a CO2 tank and draft beer taps. It takes up less space than a traditional keezer and tends to have a more modern and sleek appearance.
Keezers are great for larger beer consumption as they generally hold more kegs than a kegerator, so they are better suited for places like pubs and bars that serve more beer. Keezers also allow for more temperature flexibility as you can adjust temperatures of each keg with the help of a thermostat, giving you the option to serve different beer types at the same time.
They are also easier to customize as you can add extra components such as drip trays, jockey boxes for portable service, and extra keg taps.
On the other hand, kegerators are more efficient for small- to medium-sized beer consumption and for those who don’t need multiple beer types to be served at the same time. Kegerators also feature a sleek and modern look, making them ideal for home bars or any user-facing application.
Additionally, they are significantly easier to move and transport, so they are a great option if you need to move your draft beer system.
In conclusion, it really depends on your needs and preferences. If you have a large space and are looking to serve multiple beer types, then a keezer might be the best option for you. If you don’t have a large space and want a more modern and sleek look, then a kegerator might be a better choice.
Either way, you’ll be able to enjoy fresh draft beer from the comfort of your own home.
How does a keg fridge work?
A keg fridge is a type of specialized kitchen appliance that is used to store beer and other alcoholic beverages. The kegerator is stands for keg refrigerator and is a combination of a small refrigerator and a beer tap.
It is designed to keep a keg of beer cold and provide a means of dispensing it for enjoyment.
Keg fridges work by regulating the temperature of the refrigerator to keep it within desired temperatures. This is usually between 34 and 38 degrees Fahrenheit, which is the optimal range for most beer types.
Inside the keg fridge, the beer is contained by a metal keg. The keg is connected to a CO2 canister outside the fridge and to a beer tap mounted on the side. The CO2 canister is responsible for maintaining the ideal amount of carbonation in the beer and is released through the tap when its lever is actuated.
Depending on their size, keg fridges can hold between one and four kegs.
Keg fridges are a great way to store and dispense beer or other alcoholic beverages. They keep beverages cold and faciliate easy access once the tap is actuated.
How do you make a kegger?
Making a kegger is a great way to host a large gathering and serve a variety of beers without having to constantly fill up individual glasses. Here are the steps you’ll need to follow to make a kegger:
1. Gather the Equipment: To make a kegger, you’ll need one or two kegs, a keg tap, a co2 regulator and tank, beer lines, and hoses, ice, cups and a bucket.
2. Fill and Seal the Keg: Fill the keg with your desired brew and close the lid. Make sure that it’s tight, so that no beer will leak out.
3. Connect the Regulator: Attach the regulator to the CO2 tank and turn off the valve. Connect the tank to the keg, and connect the beer lines to the keg as well.
4. Attach the Tap and Measure Pressure: Connect the keg tap to the keg and connect it to the regulator. Set the regulator to 11-14 PSI, then measure the pressure in the keg with a beer pressure gauge.
5. Chill the Keg: Fill a cooler or bucket with ice, and place the keg inside. Let the keg sit for about two hours until it’s chilled.
6. Tap the Keg: When the keg is cold enough, you can tap it. Place the tap into the front of the keg, then press the lever down firmly to puncture the lid.
7. Check the Pressure and Serve: Now check the pressure one last time to make sure it’s in the optimal range. When you’re ready to serve the beer, open the tap and fill cups. Enjoy!
How can I use a keg without a kegerator?
You can use a keg without a kegerator, but it requires a little more effort. First, you’ll need either a beer line and CO2 tank, or a hand pump to manually pump air into the system. These will push the beer out of the keg, creating pressure that allows it to come out of the dispensing tap.
You’ll also need to make sure you have a cool space to store the keg itself, since it needs to be kept at a low temperature (32-38 degrees Fahrenheit). Lastly, you’ll need to properly clean and sanitize the keg and all of its components before dispensing any beer.
All of this is necessary to ensure the beer stays fresh and the system remains free of bacteria or other contaminants.
How do you build a wall tap?
Building a wall tap requires following a few simple steps:
1. Start by deciding where you want the tap to be in the wall and then measure and mark the spot with a pencil.
2. Cut out the drywall at the spot you have marked to make a hole for the tap. Make sure the hole is slightly larger than the tap so it will fit properly.
3. Connect the hot and cold water lines to the back of the wall tap using the compression fittings included in the kit.
4. Insert the wall tap into the wall and make sure it is lined up properly.
5. Use the screws included with the kit to secure the wall tap to the wall, making sure to use a level to check it before tightening the screws in place.
6. Attach the hot and cold water lines to the wall tap, making sure all the connection points are sealed with Teflon tape or thread sealant.
7. Turn on the water supply to the wall tap.
8. Turn on the wall tap and check for any leaks.
9. Once all is working and there are no leaks, secure the escutcheon plate to the wall tap with the screws provided in the kit.
That’s it! You have now completed the installation of your wall tap.
