In certain regions, such a tool might be called a “church key” because its design looks like the traditional iron keys used to unlock church doors in the past. Additionally, some people refer to beer bottle openers as “pry-off caps” or “pop-top openers” due to their purpose for popping off bottle caps or “prying off” tops from bottles.
In addition to being used to open beer bottles, certain styles of beer bottle openers can also be used to open soda or thick-necked bottles.
- What do bartenders use to open cans?
- What is a bar key?
- Why is it called a churchkey?
- What is an old can opener called?
- Can opener slang?
- How did a can opener get called a church key?
- What does it mean to church key someone?
- How do you use a church key can opener?
- How do you open a twisted bottle that won’t open?
- How do you open a capped bottle?
- How do you open the Boldrock without a bottle opener?
- How do you get a plastic bottle cap off?
- What can I use instead of a bottle opener?
- What is the hole on a bar key for?
- What is the slot on the top of a bottle opener for?
- How does a bottle opener make work easier?
What do bartenders use to open cans?
A bartender will typically use a hand-operated can opener, also known as a church key, to open cans. This type of can opener has two sharp points which are inserted into the lid of the can and then twisted to cut around the top edge.
Another tool that is commonly used in a bar environment to open cans is a flathead bottle opener, since it has an added flat metal blade designed specifically for removing can lids. To open the can without puncturing it, the flat blade is slid into the small opening on the lip of the lid and then twisted to loosen the lid from the can.
A keychain can opener is another common tool that a bartender may use to open cans quickly and safely. This type of opener is especially useful for cans with easier-to-open pop-top lids. It features a simple lever arm that is pressed down to pop open the top of the can.
What is a bar key?
A bar key is a common tool used in the alcohol, beverage, and hospitality industries. In most cases, a bar key is simply a flat-head screwdriver, and is often used to open bottles of soda, beer, and other beverages.
In some cases, bar keys are used to open locks and mixers, tap kegs, or dispense draft beer. Bar keys typically range from 4-6 inches in length, depending on their intended use. They can feature rubber grips, and some may feature a bottle opener along with the screwdriver head.
In some cases, bar keys may be referred to as a “Church Key” due to its original purpose—opening bottles of sacramental wine.
Why is it called a churchkey?
The origin of the phrase “church key” is actually somewhat mysterious. It may have come from the idea of having to use a metal tool to open non-twist-off beer bottle caps. The metal metal opener, resembling a key, would be used to “unlock” the bottle, leading some to suggest the phrase is derived from “key to the church.
” Others have theorized that the shape of the bottlecap remover resembled a key that might be used to open a church door.
The tool was first manufactured by the churchkey Manufacturing Company, based in St. Louis, Missouri in the early 1930s. For many years, the church key was the only piece of equipment needed to open pop, beer and soda bottles.
It was a simple, small, pocket-sized metal device consisting of a single blade, a flat and pointed blade on one end, used to puncture bottle caps and lever them off. Beer drinkers would have to “key” or “church key” their bottles open to get a drink before pry-off bottle caps became available in the mid-1960s.
Consequently, the phrase “church key” became widely used as a generic term for any tool designed for opening bottles. Through the decades, the church key opener has evolved, and a number of different designs have been produced.
Though it has become less important today due to the shift to twist-off and aluminum cans and bottles, the classic “church key” bottle opener still enjoys a great deal of popularity among beer drinkers of all stripes.
What is an old can opener called?
An old-fashioned can opener is typically referred to as a manual can opener. This type of can opener has one end with a sharp cutting blade, which is used to cut the top edge of a tin can in order to open it.
Manual can openers come in a variety of shapes and sizes, but they typically have two handles and a central gear wheel which is turned in a circular motion to make the cutting blade spin around the circumference of the can.
Manual can openers can be used to open a variety of different types of canned goods, such as tinned fruits and vegetables, soups, and canned meats. Manual can openers are simple, reliable, and do not require electricity; however, they can be more time-consuming to use then electric can openers.
Can opener slang?
“Can opener” is an Australian and New Zealand slang term for a walking route for military drills or marches, generally marked with commencement and completion points which are obvious landmarks, such as a large rock or a set of trees.
In Australia and New Zealand the term is often used to describe a mental or physical challenge, such as a drill or obstacle course, or a task which requires determination and focus. The use of the term implies a circuitous, twisting or winding route, or toil and struggle, rather than a direct route or task.
By extension, the term can be used to describe a task perceived or experienced as requiring extreme effort.
How did a can opener get called a church key?
The phrase “church key” was used to describe a can opener in the 1940s, although it is unclear exactly where the term originated. One theory is that during the 1940s and 1950s, when canned food was becoming more popular, church gates in the United States used a “key” with a pointed end to open cans that were donated for charity or for church dinners.
The key closely resembled a can opener and this led to the term “church key” being used to refer to the tool. Another possible explanation for the term is that it was coined by sailors who used a church key to open their canned foods aboard ships.
Regardless of its exact origin, the term “church key” is still used today to refer to a can opener.
What does it mean to church key someone?
Church keying someone typically refers to a prank in which a person’s clothing or vehicle is “keyed” (scratched or gouged) with a sharp object, such as a key. This prank originated in the United Kingdom during the 1960s and is meant to shame or embarrass the victim.
The term is derived from the “church key” bottle opener found in pubs. The prank involves dragging the key along a car or clothing to create deep scratches or scratches in a pattern. This is a malicious prank and is viewed as a harmful act that can cause significant damage to vehicles, clothes, and other items.
In some cases, the victims of this prank may be targeted because of their race, gender, or lifestyle. Church keying can be classified as vandalism and, depending upon the severity of the prank, may result in criminal charges.
How do you use a church key can opener?
Using a church key can opener is an easy process. Begin by placing the serrated edge of the top blade along the top edge of the can. Once the blade of the can opener is secured in position, start to open the can by pressing down firmly on the top handle.
Then, use a slight side-to-side motion to put pressure on the blade until it penetrates the top of the can. Once the blade has pierced the lid of the can, use a back-and-forth motion to open the can all the way around.
Then, you can lift the top off of the can. Lastly, use the point of the blade underneath the top lid to pull it off and discard.
How do you open a twisted bottle that won’t open?
Opening a twisted bottle that won’t open can be a difficult and frustrating experience. The first step is to try and turn the bottle cap by hand. It may be possible to manually untwist the cap by applying gentle pressure and rotating it counterclockwise.
If that does not work, then it may be possible to use a bottle opener or a pair of pliers to open it.
To use a bottle opener, it is best to hold the bottle firmly in one hand while using the other to twist the cap. To use pliers, keep the pliers tightly closed while firmly gripping the bottle cap with the pliers.
Then gently twist and pull on the cap using a back-and-forth motion. If neither of these methods work, then it may be necessary to ruin the cap and use a pair of sharp scissors to cut away the metal section of the cap.
It is also possible to use boiling water to open the bottle. Start by filling a pot with water and bringing it to a boil. Then immerse the bottle, being careful not to get the label wet. Allow the bottle to sit in the hot water for a few minutes and then shake the bottle vigorously.
The pressure within the bottle should make it easier to untwist the cap.
Finally, make sure to vent the pressure in the bottle before opening it. If the bottle is not properly vented, the pressure build up can be dangerous and the bottle may explode.
How do you open a capped bottle?
Opening a capped bottle can be a bit tricky if you don’t have the right tool for the job. The first thing to do is to inspect the top of the bottle to identify the type of cap. If the bottle is made of glass and has a metal screw-off cap, then you will need a bottle opener or sturdy flat-blade screwdriver.
Alternatively, if it is plastic and has a plastic screw-off cap, then you will need a bottle opener that is specifically designed for plastic bottles, as a regular bottle opener may not work.
Once you have the appropriate tool, simply use it to grasp the cap and twist it counter-clockwise until it breaks the seal and can be easily removed. For glass bottles, you may need to try gently tapping or rocking the bottle opener against the cap to get a good grip.
If none of these methods work, then you can try using a towel or cloth over the top of the bottle as a cushion when gripping the cap.
Finally, be aware that some bottles may have a safety seal or tamper-evident seal. If so, then you will need to carefully peel off the seal before attempting to open the bottle. If you find yourself in this situation, you should use caution, as the edges of the seal may be sharp.
How do you open the Boldrock without a bottle opener?
One way is to use a spoon or kitchen knife. To do this, you will need a stiff spoon or jagged kitchen knife, such as a steak knife. Start by holding the bottle firmly in one hand. Holding the spoon in your dominant hand, place the tip of the spoon under the lip of the bottle cap.
Then, similarly to using a bottle opener, use the spoon to twist the cap off. Be sure to exercise caution when doing this method, as it can be dangerous to open beer bottles with a sharp object.
Another way to open a bottle of Boldrock without a bottle opener is to use an everyday item such as a lighter. Just flip the lighter upside down and use the lever to twist open the bottle cap. Again, use caution when opening beer bottles with a lighter.
Finally, if you have a wall or sturdy surface available, you can try the wall opener method. Begin by holding the bottle near the neck with one hand and using the other hand to press the bottom of the bottle against the wall.
As you apply pressure, the cap should become loose and you can twist the cap off with your hand.
Each of these methods can be used to open a bottle of Boldrock without a bottle opener. Be sure to exercise caution when attempting any of these methods.
How do you get a plastic bottle cap off?
Removing a plastic bottle cap can be quite tricky, as the tension that’s created when the bottle cap is first tightened can be quite difficult to break. To get a plastic bottle cap off, the most effective approach is to use a bottle opener.
Specifically, it’s best to utilize a flat bottle opener, or two-pronged bottle opener, that is designed to break the seal between the bottle and the cap. Simply slide the opener underneath the lip of the cap and start to twist and rock the opener in an upwards motion until the seal is broken and the cap can be removed.
If you don’t have a bottle opener and are stuck trying to remove the cap, you can use another object to pry the cap off. Needle-nosed pliers can come in handy to help loosen the tight seal and loosen the grip of the cap from the bottle.
You can also use a butter knife or similar kitchen utensil to act as a flat opener and also use a pair of scissors for additional leverage when attempting to pry the cap off.
Be cautious when using any of these methods, as the resiliency of plastic bottles can vary and you don’t want to risk breaking or damaging the bottle in your attempt to remove the cap.
What can I use instead of a bottle opener?
If you find yourself without a bottle opener, there are a few other ways you can open a bottle. One way is to use a spoon. Slide the bowl of the spoon underneath the bottle cap and give it a gentle push upwards to pop off the cap.
This method works on twist-off caps, too. You may also find that a money clip or bobby pin can be used in a similar fashion; place the money clip or bobby pin under the bottle cap and gentle pry the cap up.
Another option is to use a key. Place the edge of the key at the bottom of the bottle cap and twist it to pry the cap open. With a bit of creativity, you can also use a different kind of lid as a makeshift opener.
A jar lid, a butter knife, or a can opener may do the trick. You can also use a belt buckle, a lighter, or a pencil if these other items are not available. Keep in mind that some of these methods may take a little bit of practice.
What is the hole on a bar key for?
The hole on a bar key, also known as a church key, is used for opening beer bottles and cans. The sharp point and ridges at the end of the tool are used to puncture a hole in the top of a beer can, which allows you to unseal and open the top.
The flat end can be used to pry open and separate the edges of the lid for easier opening. Additionally, the same tool can be used to pop the cap off of a bottle of beer. This tool was eventually replaced by automatic bottle openers, however it still remains a popular and useful tool.
What is the slot on the top of a bottle opener for?
The slot on the top of a bottle opener is used to hold, pull and release the caps from bottles and other canned beverages. The slot is typically V-shaped and sits at the top of the bottle opener, so when you press down the opener it will open up the slot, giving you a spot to fit the top of the bottle in.
To use the opener, you just slide the top of the bottle into the slot, press down, and then it should pop the cap off when you lift up the opener. Bottle openers with a slot on the top are typically more efficient than other models, since the slot allows you to easily grab ahold of the cap while using less force.
How does a bottle opener make work easier?
A bottle opener is an invaluable device for making work easier. It helps people open bottle tops with ease and convenience, allowing for quick consumption of whatever is inside. With a bottle opener, people no longer have to worry about struggling to open bottles themselves, something which can be a slow and tiring process.
Bottle openers are designed to be easy to use, usually with a simple design and leverage advantage. This means that minimal effort is needed to use them, making it a breeze to open bottles quickly and easily.
Furthermore, bottle openers can be kept in pockets and bags, allowing people to have them handy at all times.
In sum, bottle openers are an incredibly useful device that helps to make work easier by providing an easy and convenient way to open bottles.