Skip to Content

Are ball lock and pin lock posts interchangeable?

No, ball lock and pin lock posts are not interchangeable. Ball lock posts are designed to be used with ball lock style kegs while pin lock posts are designed to be used with pin lock style kegs. These two kegs are not the same size, so the posts and connectors used on each type of keg are not interchangeable.

Ball lock posts have two prongs about 1/4 inch apart and a black plastic sleeve on the top that allows for easy connection to a ball lock keg. A pin lock post has three pins surrounding the connection of the gas in or liquid out.

The pins need to be carefully aligned for proper connection to a pin lock keg.

In general, it’s not recommended to try to interchange ball lock and pin lock posts and connectors. Although the threads of the posts and connectors themselves are the same size, the diameter of the gas and liquid connectors differ, making it impossible to interchange them.

Additionally, trying to force a connection could lead to damage to the components.

Can I convert a pin lock keg to Ball Lock?

Yes, you can convert a pin lock keg to ball lock. The most important step to make this conversion is to purchase the correct components. You will need a brand new gas and liquid quick disconnect set, as well as a brand new ball lock keg lid.

You will then need to take the pin lock keg apart, and remove the old posts and gaskets. Once this has been done, you can then attach the new ball lock components to the keg. Make sure to clean and sanitize the components thoroughly before use.

Finally, reassemble the keg, and test the seals and connections to ensure they are working properly.

How do I know if my ball lock is pin locked?

When your ball lock is pin locked, the ball loop will become much more difficult to open. If you are having difficulty opening it, check to see if there is a pin located on the door side of the ball loop.

This pin should be protruding through the loop and should be lifted up in order to unlock the ball loop. Depending on the type of ball lock you are using, the pin may either be spring loaded or manually lifted.

If the pin is present and you are still having trouble opening it, you may need to apply additional force to the ball loop in order to open it. Additionally, some ball locks have a keyhole located on the inside of the lock.

If a key is inserted in the hole, and then turned, this will unlock the ball loop.

What are the two types of kegs?

Kegs are large pressurized containers typically used to store and serve beer, wine, and other beverages. There are two main types of kegs: Cornelius kegs, which are also known as soda or soda kegs, and party kegs, which are also known as “full-size” kegs.

Cornelius kegs, also called “homebrew kegs,” are small, cylindrical containers, usually made of stainless steel, that have a capacity of 5 gallons. They are often used for homebrewed beer and for serving draft beer in bars and restaurants.

Cornelius kegs typically come with a plastic tap and other accessories that make them easy to use. They’re also lighter and easier to transport than larger party kegs.

Party kegs, also known as “full-size” kegs, are much larger than Cornelius kegs and typically have a capacity of 15.5 gallons or more. They usually come with a metal tap and other accessories, such as clamps, regulators, and tubes.

Party kegs are usually used when serving a large volume of beer. They are more expensive than Cornelius kegs and can be difficult to transport due to their size and weight.

How do you tap a ball lock keg?

Tapping a ball lock keg requires a keg coupler that attaches to the appropriate gas and liquid post on the keg. The keg coupler utilizes a lever-handle system to securely attach the coupler. To tap the keg, slide the lever-handle up and to the left to open the coupler, then fasten the coupler firmly on the gas and liquid post.

When attached securely, flip the lever-handle down. This mechanism seals the coupler onto the keg’s posts and turns the gas on in the keg. This action creates pressure in the keg that forces the beer out through the liquid post.

As the beer flows out of the liquid post, release some of the pressure by slowly sliding the lever-handle up. This prevents too much foam from building up in the keg. When finished tapping the keg, open the gas line to release the pressure in the keg, then slide the lever-handle up and to the left to disconnect the coupler.

How long does a keg last once tapped?

The amount of time a keg will last is dependent on a variety of factors, such as temperature, storage, and the type of beer. Generally speaking, most beers stored and served at the ideal temperature will last between six to eight weeks.

Lighter beers, including lagers and pilsners, can sometimes last up to twice as long as heavier beers, such as stouts. Beers that are stored incorrectly or allowed to become too warm can spoil quickly, sometimes in as little as two weeks.

Additionally, beers with higher alcohol content tend to spoil faster than beers with a lower alcohol content. Ultimately, it’s important to keep your keg at a consistent temperature, monitor your CO2 levels, and regularly check the taste of the beer.

If you are able to maintain those factors, it is likely that your keg will last anywhere between six to eight weeks.

What type of keg do I have?

It can be difficult to determine the type of keg you have without more information. Generally, kegs come in two sizes — a Pony keg and a Full Size keg — and they are designed to hold either a 1/2 barrel (or “Full Size”) keg or a 1/4 barrel (or “Pony”) keg of beer.

Full size kegs are usually 15.5 gallons and Pony kegs are usually 7.75 gallons.

The specific keg model you have can also be determined by the connection type for the coupler. The most common type of coupler is the “D System” or American Sankey, which is typically used with domestic beers.

Another popular system is the “S System” or European Sankey coupler, which is typically used with specialty beers such as Heineken, Amstel Light and Corona. A third type of coupler, the U System, is typically used in bars and restaurants.

Finally, it is also important to note that kegs come in a variety of shapes, including cylindrical, cone-shaped, and torpedo-shaped (also known as a “party pail” or “cornelius keg”).

In conclusion, without more specific information it is difficult to determine the type of keg you have. However, by looking at the size, coupler type, and shape of the keg, you can often figure out a general description.

What kind of kegs can you get?

When it comes to kegs, there are several types available to choose from. Kegs differ in size, material, and style, making it easy to select the best keg for a particular setting or purpose. The most common sizes are 1/6 barrels (5.

17 gallons), 1/4 barrels (7.75 gallons), 1/2 barrels (15.5 gallons), and 1/1 barrels (31 gallons). Standard kegs are made of stainless steel, although some manufacturers make lighter-weight plastic kegs for easier transport.

There are also specialty kegs made of copper or aluminum, which are used for aging beer or promoting a product. The most popular style is the Cornelius keg, which is more commonly used for homebrewing and has valves, a CO2 manifold, and a pressure regulator.

There are also more traditional kegs, such as the Sankey keg and the Eurokeg, which are more commonly used for commercial and industrial purposes. When selecting a keg, it is important to consider the size, material, and style that will best meet your needs.

What are the different keg sizes?

Keg sizes vary depending on the type and brand of beer, and the amount of liquid that can fit into the keg. Generally, there are three common sizes: the basic home-use keg, the commercial keg, and the oversized keg.

The basic home-use keg is the most widely available and common type of keg. It varies in size and typically holds 5 gallons, or 640 ounces, of beer. This size is most commonly known as a Cornelius keg, a “corny keg”, or a “sixtel”, and is ideal for the average home brewer.

The commercial keg, also known as a “half-barrel” or “full-size keg”, is the standard for most restaurants and bars. It is generally 20 gallons, or 1,920 ounces, and is much larger than a home-use keg.

This type of keg is also usually slightly taller than a home-use keg.

The oversized keg is used primarily for large gatherings, such as parties and festivals. It is usually greater than 20 gallons, with some models having a capacity of up to 100 gallons, or 10,000 ounces.

This type of keg is rarely used by home brewers and is primarily restricted to commercial establishments.

While these three sizes are the most common, there are other variations, including the mini keg, that is typically 5 liters, or 169.07 ounces. Additionally, some specialized kegs can hold even more liquid, with some models having a capacity of up to 40 gallons.

What is a keg?

A keg is a cylindrical container made of stainless steel, aluminum, or fiberboard, and holds a large amount of liquid, typically beer. Kegs are designed to be pressurized and tapped to dispense the product.

Kegs are commonly filled with beers that range from 5-7 gallons in capacity and can hold up to 15.5 gallons. A Keg’s tap is connected to a pressurized system system to push out the beer. As the beer is pushed out at a steady rate, the pressure inside the keg quickly decreases and the draft beer moves through the line into the glass of the keepers.

Kegs can be found in a variety of sizes depending on the type of beer being served. They are most commonly used for large-grained beers, lagers, ales, porters, and stouts. In addition to being used as a vessel for beer, kegs have many other applications, such as for cold-fluid storage, paintball and other outdoor activities.

Some people also use kegs as planters.

What’s the difference between PIN lock and ball lock kegs?

A PIN (or spear) lock keg is a large pressurized container which stores and dispenses large amounts of beer. The keg consists of a stainless-steel barrel with a neck, which is sealed with a lid or head.

The lid is secured via a threaded locking ring, which is connected to the barrel by two large cylindrical pins, which run the length of the keg. PIN lock kegs have a single valve at the end of the barrel, which connects to a CO2 or nitrogen-filled pressure regulator.

Open the regulator and the keg is pressurized and ready to serve beer.

A ball lock keg is similar in design to the PIN lock, except it has two separate valves. The bottom valve is used to dispensing beer, while the top valve is used for pressurizing the keg. The two valves are connected by a pair of cylinders which run the length of the keg, and each cylinder is sealed by a ball bearing.

Both PIN lock and ball lock kegs can be filled with any type of beer and are pressurized in the same way. Ball lock kegs are usually lighter than PIN lock kegs and their two valves can make pressurizing and serving beer slightly easier.

How do you change a PIN lock to a ball lock?

Changing a PIN lock to a ball lock is relatively straightforward. Begin by disconnecting the power to the lock and then disassembling the lock. Depending on the specific lock, there may be a few different steps involved, so it is important to consult the manufacturer’s instructions for disassembly and to keep track of the parts in order to properly reassemble the lock.

Once the lock is disassembled, you will need to look for the pins that secure the latch in each of the lock’s components. Remove the pins from the lock and install the proper ball bearings to construct the ball lock.

After the new ball bearings are in place, use the assembly diagram from the manufacturer to put the lock back together.

Finally, once the lock is reassembled and the power has been reconnected, you will need to program the ball lock to accept a new code. To do this, consult the manufacturer’s instructions to enter a new code into the lock.

By following these steps, you can successfully change a PIN lock to a ball lock.

How does a ball lock pin work?

A ball lock pin is a type of mechanical fastening device that utilizes balls to secure two parts together. It works by having a cylindrical body with a head and a latch lever on one end and at least two balls, one on either side, on the other end.

The balls are seated in a shallow pocket and held in place with a circular plate or divider plate. The latch lever is used to move the plate and the balls apart, which allows the pin to be inserted into two parts.

Once the latch lever is let go, the plate moves back and the balls snap into place, locking the two parts together. Because the balls are held in place by the plate, the pin is held firmly in place and can’t be unintentionally removed without moving the latch lever.

This makes it an ideal fastening device for applications where a reliable connection is needed to ensure that parts stay connected.

Can pin lock keg be converted to ball lock?

Yes, pin lock kegs can be converted to ball lock. This can be done by replacing the pin lock connectors with ball lock connectors and installing a stainless steel picnic tap to the outside of the keg.

This process is fairly simple and can be done by someone with basic DIY and electrical skills. To convert a pin lock keg to a ball lock, you will need a ball lock top and bottom, a keg gas washer, a gas-in silicone seal, and a gas-out silicone seal, a stainless steel picnic tap, a spanner wrench, and a drill with a 1/2” drill bit.

First, you need to unscrew the pin lock lid to access the pins and o-rings inside the keg. Using a spanner wrench, unscrew the pin locks and remove them. Next, measure the size of the holes and use a drill to make the necessary adjustments in order to install the ball locks.

Now, it’s time to install the ball locks. Insert the gas-in and gas-out silicone seal into the new ball locks and then attach the ball locks to the holes you prepared earlier. Finally, attach the stainless steel tap to the outside of the keg and you’re ready to go!.

It is important to note that before you disconnect the old pin lock connectors, ensure that there is no pressure in the keg so that you don’t run into any issues when attempting to replace the connectors.

Additionally, make sure to read the instructions before you start so you don’t make any mistakes. With the right tools and patience, you can easily convert a pin lock keg to a ball lock keg.

Can you get soda in a keg?

Yes, you can get soda in a keg. This is referred to as a “soda keg” or “draught soda. ” Soda kegs come in a variety of sizes and some of the more popular brands even offer one-way kegs, which can be returned when empty and do not require deposits or cleaning, making them a more convenient and cost-effective solution for businesses.

A traditional soda keg works in much the same way as a beer keg; all you need is a CO2 tank, a few lines of tubing, and a soda keg tap to dispense the soda. When soda is dispensed from a keg, it is generally fresher and tastes better than canned or bottled soda.

It is more cost-effective as it doesn’t use plastic bottles or cans, it doesn’t fill up the garbage with soda cans, and it can also reduce over spilt soda. Furthermore, it is much more convenient than cans or bottles with no hassle from opening, pouring and disposing of cans or bottles.

For all of those reasons, soda kegs are becoming more popular for both businesses and consumers.