Yes, you can convert pin lock to ball lock. Pin lock kegs are slightly shorter than ball lock kegs, so you’ll need to purchase a pin lock to ball lock conversion kit. The kit should include two threaded posts that fit into the pin lock fittings and have ball lock fittings on the other end.
You’ll also need a new liquid out post and pick up tube. Once you have all of these components, you can follow the assembly instructions that come with the kit. After the conversion kit has been installed, the posts should be sealed with thread tape and tightened with a wrench.
From there, you’ll need to attach a new liquid out post and install a new pick-up tube. Once this is done, your pin lock keg has been successfully converted to a ball lock keg.
What’s the difference between ball lock and pin lock kegs?
The primary difference between ball lock and pin lock kegs is the type of connector used. Ball lock kegs usually have a connector on one end that looks like a cylindrical port with two small circles on either side – these are the connection points for the gas and liquid lines.
Pin lock kegs, on the other hand, have three pins on each side of the connecting port – one pin is the inlet, while the other two pins are the outlet. As far as convenience, pin lock kegs are easier to connect to the gas and liquid lines and are typically less expensive than ball lock kegs.
However, ball lock kegs are much more durable, so they tend to be the preferred choice among home brewers who are looking for a longer-lasting keg. Additionally, ball lock kegs come in a variety of sizes, while pin lock kegs typically come in a single 5-gallon size.
Furthermore, ball lock kegs feature one-way valves, making them a much safer and more convenient choice for storing and dispensing beer.
In summary, ball lock and pin lock kegs both have their advantages, however ball lock kegs have a number of advantages that make them the preferred choice for many home brewers. They are more expensive than pin lock kegs and come in a variety of sizes, but they are more durable and offer one-way valves for more secure beer storage and easier dispensing.
Are corny keg posts interchangeable?
No, corny keg posts are not interchangeable. Each post is designed to fit a specific type of keg, and swapping posts between different kegs could cause damage to the keg and the posts themselves. The posts on a corny keg should be specific to the type of keg it is.
Each keg manufacturer usually has their own design, and these designs are not interchangeable, even if they look the same. Using the wrong size post could lead to problems such as leaking, and could cause damage to the interior and exterior of the keg.
If the posts need to be replaced, visit your keg manufacturer to get the correct size or contact an experienced keg repair technician.
How do I know if my ball lock is pin locked?
If you are trying to determine if your ball lock is pin locked, there are a few things to check. First, look at the backside of the ball lock to see if there is a pin. Many ball locks come with a pin that is inserted into the hole on the backside to lock the lock and prevent it from being opened.
If you can easily see the pin inserted in the hole, then your ball lock is likely pin locked. If you do not see the pin, you can also try to spin the mechanism in the opposite direction. If the ball lock is locked, it should feel stuck or it should not spin freely.
If it spins freely, then it is not pin locked. Finally, you can also try to insert a key into the lock to determine if it is pin locked. If the key will not go in, then it is likely pin locked.
How does a ball lock pin work?
A ball lock pin is a fastening device used to secure components and are typically used in the aerospace, automotive, and plastic injection molding industries. They consist of two components- a body that contains a male threaded shank and an internal ball bearing or two, and a cap that contains an internal female threaded socket and an outer collar which opens and closes when actuated.
The ball bearing is engaged by the collar when the pin is inserted into the respective part.
Once the pin is put into place, the user rotates the cap to position the collar until it engages the internal ball bearings, securing the pin and preventing its removal. The amount of force required to install the pin is determined by the torque applied during installation, making the pin suitable for use in high security applications.
The ball lock pin is beneficial because it can secure a variety of components, both in terms of size and material. For example, it can secure lightweight parts, such as screws and nuts, or heavier components, such as door hinges.
Additionally, its two-piece construction allows for ease of installation as one piece is free to rotate, requiring no specialized tools to attach or detach the pin. The size of the pin makes it accessible in tight spaces with minimal clearance.
Finally, the secure assembly provided by the ball lock pin ensures that it can be used for a variety of tasks.
How do you use a PIN lock keg?
To use a PIN lock keg, you will need to purchase a keg with a locking mechanism that is compatible with your system. Once you have the keg, you will need to follow these steps:
1. Find a location for your keg that is level and stable. A floor is typically the best surface for this.
2. Place your keg in the location you have chosen, and then thread the appropriate coupler into the top of the keg.
3. Connect your gas line to the coupler, and then turn on the gas.
4. Check for leaks by turning on the faucet and looking for any bubbles. If you see any bubbles, tighten the connection until they stop.
5. once the keg is full of beer, turn off the gas and disconnect the coupler.
6. Place the keg in your refrigerator and allow it to chill for at least 24 hours before serving.
7. When you are ready to serve, connect the coupler to the top of the keg and turn on the gas.
8. Open the faucet and let the beer flow into your glass. Enjoy!
Can you get soda in a keg?
Yes, it is possible to get soda in a keg. The process of transferring soda from a typical can or bottle into a keg is called soda kegging and is a popular method of serving soda. This system is used by many homes, bars, and restaurants to dispense soda quickly and easily for customers.
To prepare the keg for use, one will need to purchase a carbonation system with a regulator, a carbon dioxide (CO2) tank, hoses, connectors, and kegs with appropriate fittings. Once all the connections are made and the proper carbon dioxide pressure is set, the soda can be transferred from the cans or bottles into the keg.
The soda is then ready to be served, typically with a soda gun connected to the keg.
What is a Sanke keg?
A sani keg, sometimes also referred to as a sankey keg or a sanke keg, is a type of keg used for storing and dispensing beer. It is specifically designed for the use of breweries, pub owners, and other distributors, and is usually made from stainless steel.
Sankey kegs have a characteristic shape, a curved body and a spear that pierces the side. The curved body makes it easier for bartenders and servers to maneuver the keg and the spear makes it easier for them to tap the beer.
The keg also has a valve that allows for easy and reliable dispensing. Sankey kegs have replaced traditional wood and steel kegs, due to their improved strength, durability, and hygiene. They also reduce the risk of contamination and allow the beer to last longer due to their tight seal.
In addition to this, they are often stackable and make storage and transportation easier.
What is Amcyl keg?
An Amcyl keg is a type of beer keg made from stainless steel. It is cylindrical in shape and is fitted with a valve that allows the beer to be poured from it. These kegs are used in commercial breweries and many home brewers opt for them too.
They have a capacity ranging from 5 to 15 gallons and are easy to transport, especially if equipped with a wheeled cart. Amcyl kegs have a sturdy and reliable construction, making them suitable for storing and serving different types of beer.
They are usually well insulated and capable of preserving the beer’s characteristics and flavor for an extended period of time. Additionally, they are pressure-rated, allowing them to be pressurized with a CO2 canister.
This type of keg is also relatively easy to clean and it is dishwasher friendly, saving time and money.
What type of kegs are there?
Including those specifically designed for a variety of beer styles, as well as those designed to store and transport liquids other than beer.
When it comes to beer-specific kegs, the most common style is the American Sankey keg, which is typically made of stainless steel. This type of keg is becoming increasingly popular, because it is easier to clean and maintain than traditional kegs.
Additionally, this style features a valve at the top for easy dispensing, as well as product labeling requirements that indicate the beer’s original gravity, date packaged, and origin.
European Sankey kegs are also becoming increasingly popular, because they are lighter in weight than their American counterparts and feature a wider range of valve sizes, allowing for greater flexibility when it comes to dispensing and storage requirements.
Additionally, these kegs also offer product labeling requirements which indicate ingredients, original gravity, and expiration date.
Cornelius kegs are another popular style, which are typically made of stainless steel, and feature a valve at the top and an internal carbon dioxide pressure regulator. These kegs are smaller than other types, making them great for home draft setups, though they require more maintenance than traditional kegs due to the need to clean and sanitize the internal components.
Finally, other types of kegs are manufactured for non-beer application, such as kombucha and cider. These specialized kegs often feature different valve and lid styles, though aesthetics may vary depending on the brand and specific keg type.
How do you remove a keg from a poppet?
Removing a keg of beer from a poppet is generally a straightforward process. First, you should make sure the keg is depressurized, to prevent any beer or foam spraying out. Next, depending on the model of poppet, you may either need to unscrew the poppet valve or simply pull out the pin.
Once the valve is removed, you’ll need to disconnect the CO2 hose, the beer line, and any other lines and valves connected to the keg. Finally, you can lift and tilt the keg away from the poppet, allowing you to take it off and transport it wherever necessary.
You may find that storing or transporting the keg in an upright position is preferable, as it will prevent any remaining beer from spilling out.
How do you change a keg of soda?
Changing a keg of soda requires a few simple steps. First, you will need a keg changer tool or a CO2 tank and regulator. You will also need enough CO2 to flush the lines and replace the old keg.
To start, you’ll need to disconnect and remove the old keg from the tap or dispenser, and then disconnect the gas line and liquid line. Next, attach your CO2 tank to the regulator, and then attach the regulator to the gas line.
Then adjust the regulator to serve the keg, usually at 10-12 PSI.
Once the regulator is adjusted, flush out the lines with a few seconds of CO2 pressure. Disconnect the regulator and remove the old keg. Then connect the CO2 regulator to the new empty keg, open the valve, and flush the lines with a few seconds of CO2.
Once the lines are flushed, connect the regulator back to the gas line, adjust the pressure to serving, and serve the keg. Be sure to periodically check the pressure over time to make sure it is adjusted correctly.
Can you buy kegs of soda?
Yes, you can buy kegs of soda. Kegs of soda are becoming an increasingly popular option for those throwing a large event or gathering. They offer a fast, convenient, and cost-effective way to provide an unlimited supply of cold soda to guests.
Kegs of soda are typically available from grocery and convenience stores, as well as from local distributors. When buying a keg of soda, keep in mind that it will need to be prepared and served with proper equipment.
A special tap system is needed to dispense the soda from the keg, which can be either purchased or rented from the store or distributor. Additionally, a CO2 tank is necessary to keep the soda properly pressurized while serving.
Can a kegerator dispense soda?
Yes, a kegerator can dispense soda. Although most kegerators are used for dispensing beer, they can be used for other beverages like soda. Depending on the model, you may need to purchase a separate conversion kit to install in the kegerator that allows for carbonated soda.
The kit includes a CO2 regulator, a CO2 tank, a soda empty keg, and a faucet. Once the soda is dispensed, the CO2 regulator needs to be adjusted to the desired carbonation level. Be sure to clean and maintain the kegerator regularly so that the soda you dispense tastes its best.
What are the different types of kegs?
There are five main types of keg that are available on the market, each with their own unique characteristics.
The most common type of keg is the standard or ‘full-size’ keg, which contains 15.5 gallons (58.67 liters) of beer or other beverage. This type of keg is popular in bars and for large gatherings, as it is the most cost-effective way to store and serve beer in large quantities.
The next common type is the “half-barrel” keg. This keg can hold up to 15.5 gallons (58.67 liters) of beer, similar to the full-size keg, but is shorter in height and diameter. It is a popular choice for venues with limited space.
The third type is the “quarter-barrel” keg, which holds 7.75 gallons (29.34 liters) and is suitable for smaller gatherings and events.
The fourth type is the “sixtel” keg, which can hold 5.16 gallons (19.53 liters). It is much shorter than the full-size and half-barrel kegs, making it a good choice for venues with limited space.
The fifth type is the “minikeg,” or “cornelius keg,” which holds just under a gallon (3.8 liters) of beer. These kegs are commonly used by home-brewers as they are easier to store and transport than larger kegs.
No matter which type of keg you choose, you can be sure that it will help you to easily and cost-effectively deliver the perfect beverage to your guests.
How do I know what level my keg is?
The best way to know the level of beer in your keg is to weigh the keg. You can use a digital scale, or you can opt for a mechanical scale, both of which can be purchased online or at a local homebrew supply store.
You can find scales specifically designed for weighing kegs, which are usually fairly accurate and easy to use. When measuring the weight of the keg, it is important to note the tare weight, which is the weight of the keg when it is empty.
The difference between the tare weight and the weight of the full keg will give you the total volume of liquid in the keg. This can then be converted into an approximate level of beer in the keg, based on the average weight of beer per gallon.
Measuring the level of beer this way will give you a more accurate idea than simply eyeballing the level of the beer in the keg.
What thread is a ball lock keg?
Ball lock kegs utilize a different type of threading than most other kegs. The ball lock keg threading is referred to as a “ball lock” or “MFL” (Male Flared) threading. It is identified by two sets of ridges, which are typically located in the center of the thread.
Ball lock threaded kegs are used in place of pin lock kegs, due to improved reliability, performance, and higher levels of oxygen resistance. The threading allows a gas in connector and a liquid out connector to be attached to the keg, creating a closed-system for beer and other liquids.
The ball lock keg threading is beneficial because it is stronger than the pin lock threading and can handle higher levels of pressure. Aside from being stronger than the pin lock threading, the ball lock threading also provides a tighter seal.
This ensures liquid cannot leak from between the connector and the keg.
Can pin lock keg be converted to ball lock?
Yes, it is possible to convert a pin lock keg to a ball lock. There are beer conversion kits available online and at brew stores that allow you to switch the pin lock posts and lids to ball locks. The components of the pin lock and ball lock are very similar, so you can purchase the correct parts to make the conversion.
The main difference between the two is the type of fittings they use – the pin lock uses a ‘pins’ fitting while the ball lock uses ‘balls’ fittings. With the correct parts and careful assembly, you can easily convert a pin lock keg to a ball lock.
What is a MFL connection?
A MFL (Male Flare Lock) connection is a type of quick-connect fitting used primarily in the beverage dispensing industry. It is a mechanically reliable and secure way to connect a tube to a device, such as a beer keg or a soda fountain.
The MFL connection is composed of two parts: a male nipple, which fits into the receiving end of the device, and a female fitting, which slides over the end of the tube. The two components are then held together by an integrated flare nut.
The nut compresses the walls of the nipple fittings, providing a tight seal that is not easily disconnected, making it an ideal way to maintain a secure connection in a high-pressure environment. Additionally, the flare nut design makes it possible to disconnect the fitting without needing any tools or specialized skills.
