Yes, you can make a kegerator out of a mini fridge! A kegerator is essentially a mini refrigerator that has been rigged to dispense cold beer from a keg. You can easily make a kegerator using a mini fridge by following a few simple steps:
1. Choose a mini fridge – Typically, you’ll want to find a mini fridge with enough space to fit a keg and CO2 tank. It also helps if it has a temperature control so you can set it to the optimal keg storage temperature.
2. Gather the necessary tools – You’ll need a drill, drill bit, beer line, beer tap, CO2 regulator, and CO2 tank.
3. Make sure your keg fits – Measure your keg and the interior space of your mini fridge to make sure the keg will fit.
4. Drill a hole in the back of the fridge – This is where you’ll install your beer tap.
5. Connect the beer line – Attach one end of the beer line to the beer tap and the other end to the keg.
6. Connect the CO2 tank and regulator – Fasten the CO2 tank to the back of your mini fridge and the regulator to the tank.
7. Set the temperature and you’re ready to go!
By following these steps, you can easily make a kegerator out of a mini fridge for cold beer anytime you want!
What size fridge do you need for a keg?
The size of the fridge you need for a keg will depend on a few factors, such as the type of keg and size of keg you have. A smaller-sized keg (such as a 1/4 barrel) will likely fit in a standard fridge if the shelves and shelves are removed.
Larger kegs, such as a 1/2 barrel, will likely require a dedicated chest freezer as the fridge will not have enough space for the keg and it may disrupt normal cooling efficiency.
When purchasing a fridge for a larger keg, it is important to look for on with features such as an adjustable thermostat and temperature lock, as well as an interior light. It is also important to purchase a fridge with enough space to store additional equipment and ingredients, such as buckets and tubes, necessary for running and storing a keg.
Finally, it is important to make sure the fridge is large enough to accommodate the whole keg itself. It is important to measure the dimensions of the keg before purchasing a fridge to ensure there is enough room to properly store it.
In general, you will need at least 24 cubic feet of interior space for a full-sized keg.
How do I turn my fridge into a kegerator?
Turning your refrigerator into a kegerator is a fairly easy process that requires the purchase of a few tools and accessories.
The first thing you will need to do is purchase a keg tapping kit, which usually includes a keg coupler, an air-cooled beverage line, a pressure regulator, and a faucet. Depending on the type of beer you are serving, you may also need to purchase an additional keg coupler to accommodate brewery-specific tap fittings.
You’ll also need to assemble the air-cooled beverage line and attach it to the keg coupler and the regulator.
Once you have all the parts, turn off your refrigerator and pull it away from the wall. Carefully pull the refrigerator away from the wall and begin to assemble the draft system. Start by connecting the tubing from the keg coupler to the airline and the regulator.
Make sure the connections are secured tightly before turning your refrigerator back on.
When you turn your refrigerator back on, you may need to adjust the regulator to match the recommended carbonation level of the beer you are serving. In some models, you may need to adjust the cold air vent on the refrigerator door to allow warmer air to pass through.
This is an important step to ensure that your kegerator is set to the proper temperature.
Finally, you will want to ensure your kegerator has enough oxygen behind it to support your beer flow. This is done by checking the pressure when you pull a beer. If it is not within the recommended range, adjust the regulator until the pressure is consistent.
Once the kegerator is assembled and adjusted correctly, you can start serving beer from it. Enjoy!
Is buying a kegerator worth it?
Buying a kegerator is definitely worth it if you’re someone who loves cold draft beer and frequently hosts gatherings of friends and family. With a kegerator you’ll be able to pour draft beer in the comfort of your own home, and enjoy the unique taste and smoothness of quality beers.
In addition, having your own kegerator can save you money in the long run, since you’ll no longer have to purchase individual bottles or cans of beer. Plus, you won’t have to worry about making multiple trips to the store to replenish your beer supply.
Overall, a kegerator is a great asset to have if you’re an avid beer drinker, and can be a great conversation starter when hosting parties. There’s nothing like the convenience of pouring your own cold draft beer without having to worry about constantly restocking your supply.
How long does beer last in a kegerator?
How long beer will last in a kegerator depends on a number of factors, such as the temperature of storage, the style of beer, and the size of the kegerator. Generally speaking, though, a beer can last between two to three months when stored properly in a kegerator set at 35-40 degrees Fahrenheit.
Lagers and pilsners tend to hold their taste better than ales over time, giving them a slightly longer shelf life. Lower-alcohol styles of beer, such as light lagers, may last even longer. Kegerators with larger systems can also help to preserve beer for longer periods of time, since there is more room for insulation and oxidation protection.
Therefore, when kept in optimal conditions, beer can stay fresh in a kegerator for at least two to three months before being replaced with a fresh keg.
Can I drill a hole in my fridge?
Drilling a hole in your fridge is possible, but it is not recommended. This is due to the fact that it may affect the refrigeration of your unit and make the seal less effective. If you are looking to mount something on your fridge, there are a range of adhesive products that may be more practical and safer to use.
Make sure to read the recommendations of the manufacturer before drilling any holes into your fridgeless. Furthermore, it is wise to wear protective equipment when drilling, such as safety glasses, to protect your eyes and other parts of your body.
How do I run a CO2 line through my fridge?
Running a CO2 line through a refrigerator can be a relatively straightforward process, but it is important to take safety and the manufacturer’s instructions into account. Before starting, locate and review the user manual for your specific refrigerator model, as this will outline the specific processes and guidelines you need to follow.
The most important aspect is to install the CO2 regulator and manifold to the outside of the fridge, allowing the pressure to equalise safely. This ensures that the CO2 is not exposed to any risk, while also remaining accessible.
Once this is done, the next step is to attach the CO2 regulator and manifold to the wall, near the fridge. This will allow you to send the CO2 through the fridge’s wall. Again, take care to follow the manufacturer’s instructions for actual installation, as these can vary from model to model.
You then need to insert the CO2 line into a hole which is compatible with the regulator. This can be pre-drilled in some models, but if not you will need to drill a hole which fits the regulator. You should then thread the CO2 line through the wall, behind the fridge, as this keeps it safe and organized.
The final step is to connect the CO2 line to the regulator. This can be done either by screwing it in, or by using an adapter. Once everything is securely connected and in place, you are ready to run a CO2 line through your refrigerator.
Do you need a CO2 tank for a kegerator?
Yes, a CO2 tank is necessary for a kegerator to carbonate the beer and allow it to pour properly. The CO2 tank provides the carbon dioxide (CO2) necessary to carbonate the beer. Additionally, since most commercial beers are stored under pressure, the CO2 tank is used to provide pressure to the keg and serve the beer.
The CO2 tank also keeps the pressure consistent, allowing the beer to stay fresh. CO2 tanks come in a variety of sizes and should be replaced when the pressure falls below a certain level, as this can affect the flavor and carbonation of the beer.
It is important to choose the proper size of tank for your kegerator as an undersized tank may not be able to keep the pressure consistent.
How do you make a homemade kegerator?
Making a homemade kegerator is a great way to save money and still be able to enjoy draft beer at home. Here are the steps to take in order to make your own kegerator:
1. Gather all the necessary items. You’ll need a refrigerator or freezer, a place to attach the beer tap, a CO2 tank, and all of the beer line components.
2. Create a hole on the top of the refrigerator or freezer in order to attach your beer tap. It’s usually best to find a spot that is on the same level as where you’ll be pouring the beer. Drill a hole to the exact size of the faucet you purchased.
3. Attach the beer tap and make sure that it is firmly secured with the necessary screws and washers. You can also use a plug to cover the hole when the tap is not in use.
4. Connect the gas line that is necessary to dispense the beer. Make sure that the gas line attaches to the shank and extends all the way to the CO2 tank.
5. Connect the beer line to the shank. Make sure the beer line is secured properly and that the right amount of tension is applied when screwing in the beer line.
6. Insert the keg of beer into the kegerator. Make sure the angle of the keg is correct to allow for proper flow of beer from the tap when opened.
7. Connect the gas line from the CO2 tank to the regulator, then attach the regulator to the CO2 tank. Make sure the pressure gauge is at the correct pressure for the type of beer you are tapping.
8. Lastly, turn on the CO2 and adjust the dispensing pressure to the correct levels. This is usually done on the regulator next to the CO2 tank, and is typically at a pressure of 12-14 psi.
That’s it! Now you have a homebrew kegerator and can pour yourself a cold, draft beer!
Can you put a mini keg in a kegerator?
Yes, you can put a mini keg in a kegerator. Typically, a mini keg is 5 liters, so it can be a great size for small gatherings and parties. To put a mini keg into a kegerator, you’ll need to make sure that the kegerator is large enough to hold the mini keg; if it’s not, then you might need to buy a converter kit that fits the mini keg inside the kegerator.
Also, the lever that opens the keg needs to have an extra seal to make sure the beer doesn’t leak out. Finally, establish the correct pressure and carbonation levels; this should be done with the help of a pressure regulator or regulator gauge.
Once everything is set up correctly, you’re ready to pour a cold beer from your mini keg!.
What size kegs fit in a kegerator?
The size of a keg that will fit inside a kegerator largely depends on the size of the kegerator itself. Generally speaking, most home-sized kegerators are designed to fit the standard American 1/4 barrel keg, otherwise referred to as a “sixth barrel”.
These kegs typically measure 16 inches in height and have a diameter of just over 9 inches. On the other hand, the most popular commercial kegs – known as the 1/2 barrel – is slightly larger, measuring in at approximately 24 inches tall and just over 16 inches in diameter.
Most kegerators are unable to accommodate these larger commercial kegs. However, it is sometimes possible to fit a 1/6 barrel and 1/2 barrel in larger kegerators that have been specifically designed to accommodate both sizes.
In such cases, brackets typically need to be affixed to the interior walls of the kegerator to hold the two kegs securely in place. Furthermore, these dual-keg kegerator models typically only feature a single tap, so both kegs will need to be connected to the same one.
Is it worth having a kegerator?
Yes, having a kegerator is worth it. A kegerator allows you to enjoy cold, freshly tapped beer in your own home. You can stock it up with several types of beer and experiment to find your favorite brand and flavor.
Having a kegerator can be cost-effective because it makes each beer cost much less than you would usually pay for it in a bar or restaurant. You also save time, as you no longer need to make a trip to the store or bar to buy a beer.
It’s also a great conversation-starter and can add a fun and unique touch to any party. Finally, kegerators are easy to use and maintain. You just have to fill it with beer and carbon dioxide, and it will keep your brew cold and ready to serve.
How many corny kegs fit in a mini fridge?
The exact number of corny kegs that will fit in a mini fridge will depend on the size and style of the fridge, as well as the size of the kegs. Generally speaking, a standard-size mini fridge can comfortably accommodate one full-sized corny keg and is capable of accommodating two corny kegs with some rearranging and/or stacking.
However, larger kegs may not fit inside a standard-sized mini fridge, even if the shelves are removed. Furthermore, if a mini fridge is equipped with a built-in freezer, then it may not fit any kegs due to the amount of space needed for the freezer portion.
Therefore, it’s best to measure the dimensions of the mini fridge before purchasing kegs in order to determine if they will fit.
What is the smallest keg size?
The smallest keg size available is a mini keg, also known as a Bubba Keg. Mini kegs are generally a 5-liter size keg, and can hold up to 14 12-ounce beers. Mini kegs are a great size for parties or smaller get-togethers, or even for a single person to enjoy over a few days.
They are also an economical option compared to larger kegs. Additionally, they are often used by home brewers to test out recipes or craft their own beer.
How does a mini kegerator work?
A mini kegerator is an appliance that is used to dispense beer from a small container – usually a mini keg. It can also be used to keep beer cold. The basic working principle of a mini kegerator is similar to a regular kegerator: CO2 gas is used to pressurize the beer in the keg.
As you press down on the tap and pull the beer out, the CO2 pushes the beer up and out of the keg. The gas then exits the appliance through a bubbler or venting outlet. Cold air is circulated through the mini kegerator to keep the beer at a consistent temperature.
The beer is kept cold in the keg until it reaches the tap where you pour it into a glass. With a mini kegerator, it’s easy to keep a few beers cold and pre-poured for easy dispensing. They are ideal for parties or just having a few friends over for drinks.
How many beers do you get out of a mini keg?
The amount of beer you can get out of a mini-keg or bubba keg will vary based on the size of the keg. A 5-liter mini-keg (or 1.3 gallon) contains approximately 14-16 (12-ounce) beers, while a 10-liter mini-keg (or 2.
6 gallons) contains 28-33 beers. A mini-keg is closer to a full-sized keg in size but does not contain as much beer. In comparison, a full-sized keg generally holds around 165 beers. When purchasing a mini-keg, it is important to note that beer can go bad if left unrefrigerated or unopened for too long.
It is best to pour the mini-keg’s contents within a short period of time, even if you are unable to drink it all in one go.
How much pressure can a mini keg hold?
A mini keg can hold up to five liters of beer, also known as a six-pack, and is pressurized to about 15 to 20 PSI or pounds per square inch. This is the same amount of pressure used in commercial beer taps, allowing you to dispense the same quality draft beer from your keg.
In order to dispense quality beer, the mini keg should be kept cold; colder temperatures mean the beer won’t foam up when dispensed, allowing for the optimal use of the mini keg. Additionally, keeping the keg cold helps maintain its pressurized state, ensuring that the beer stays fresh for a longer period of time.
Is the Heineken keg a good deal?
The Heineken keg is a great deal for larger groups and events. It offers a great quantity of beer for a single purchase, and the keg itself is reusable, so it’s worth the investment for larger groups.
Additionally, the keg itself is lightweight and easy to transport, making it a convenient and practical choice for parties. The Heineken keg also maintains optimal chill level for five days, so you don’t have to worry about your beer going flat.
Furthermore, it comes in a range of sizes depending on your needs, so you can get an appropriate amount of beer for your group size. All in all, the Heineken keg provides a cost-effective and convenient option for larger groups looking to save money and enjoy a lot of beer.
How do you keep a 5 liter keg cold?
Keeping a 5 liter keg cold requires a few simple steps. First, make sure the keg is pre-chilled before transporting it and store it at a temperature of between 37 to 40 degrees Fahrenheit. It is also important to wrap the keg in an insulated keg sock or an old blanket.
This will help in maintaining a cool environment for the keg and reduce the amount of fast warming. Additionally, place the keg in an ice chest filled with several bags of ice. The fifth liter keg should fit snugly in an ice chest that is at least two times larger than the size of the keg.
Adding a layer of tinfoil over the bag of ice will also help in keeping it colder for longer. Another option is to freeze several water bottle and stand them upright around the keg, filling in any space between the keg and the walls of the cooler.
You may also freeze a towel and wrap it around the keg to help keep it cool. Finally, keep the keg away from direct sunlight and heat to help ensure it stays cold.
