Skip to Content

How do you use a BrewZilla?

Using the BrewZilla requires a few simple steps. Before you begin, make sure the equipment is clean and all of the components are in the correct order.

1. Begin by placing the grain into the grain champ, which is connected to the BrewZilla’s top grain port.

2. Once the grain has been loaded into the grain champ, attach the wort pump and recirculation arm to the bottom of the BrewZilla.

3. Next, connect the heating element to the power source. Turn the switch to the “on” position to activate the heating element.

4. Now, add your malt to the Unitank, put the lid on and place the Unitank inside the BrewZilla.

5. Set the BrewZilla’s switch to the “mash” position and adjust the mash temperature. This will heat the malt and initiate the mash process.

6. Once the desired mash temperature has been reached, stir the mash and recirculate it for 15 minutes. The mash process should take about 45 minutes total.

7. After the mashing is done, remove the Unitank and set the switch on the BrewZilla to the “boil” position.

8. Add the hops to the Unitank and again, place the Unitank inside the BrewZilla.

9. Now, adjust the boil temperature until it reaches a rolling, vigorous boil.

10. The boil should take 30 minutes with the last 5 minutes being used to apply the Whirlpool process.

11. Once the boil is complete, cool the wort before transferring it to the fermenter.

And that’s how you use a BrewZilla. By following these steps, you can make delicious homebrew beer with ease. Cheers!

Is BrewZilla the same as Robobrew?

No, BrewZilla and Robobrew are two different products. BrewZilla is a grain-to-glass automated brewing system that comes with an app-controlled touchscreen and an array of automated brewing features.

Robobrew is a brewery-in-a-box system that includes an all-grain brewing machine, an electric element for efficient heating, and an app integration for a truly hands-free experience. Both products offer a variety of smart features to make homebrewing easier and more automated, but they have different capabilities and uses.

While BrewZilla is a grain-to-glass automated brewing system, Robobrew is a brewery-in-a-box that gives homebrewers access to a variety of automatic brewing options all within one unit. Your choice of these two products will depend on your needs and preferences as a homebrewer.

Do you need to Sparge with Robobrew?

No, you do not need to sparge when using a Robobrew. The Robobrew is an all-in-one, all-grain brewing system, meaning all the necessary brewing steps, such as mashing and boiling, can be completed in the same vessel, negating the need to sparge.

In addition, the Robobrew features a boiling element at the bottom of the unit which heats the wort directly, removing the need to separate the wort from unspent grains which is necessary during sparging.

This direct heating also allows brewers to bring their wort to a boil more quickly, speeding up the entire brewing process.

What is a Robobrew?

A Robobrew is an automated all-in-one home brewing system designed to reduce the time and effort needed to produce high-quality beer at home. It consists of an insulated, hermetically sealed stainless steel vessel into which all the ingredients for brewing can be added.

With a built-in heating element, an adjustable thermometer, and an adjustable pump, the Robobrew is able to regulate temperatures, control and monitor the water levels, and monitor the rate of vapor release.

It also features a Grain Crusher and Sparge Arm to crush and mix the grain into the wort, as well as a rotating Mixer to thoroughly mix the wort prior to fermentation. The brewer also has a built-in spigot for draining the wort and a three-knob control module for controlling the temperature and the pump for precise control of the process.

All of these components are housed in a sleek and modern design and can plug into any standard 110V outlet to provide a simple and efficient home brewing system.

How long does a brew take with BrewZilla?

Brewing with a BrewZilla typically takes between 30 minutes to two hours, depending on the batch size and type of beer being brewed. The steps of a typical all-grain brew day with BrewZilla include milling the grains, mashing, lautering, boiling, chilling, and finally transferring to the fermenter.

The total brewing time will also depend on the efficiency of your setup and the amount of time needed for each step. Mashing typically takes about an hour, followed by lautering for about 30 minutes.

Boiling time depends on the size of the kettle, and can take between 30 minutes to 90 minutes. You will also need to chill the wort to the desired temperature, which will take generally take 10 to 30 minutes with a counterflow chiller.

Finally, the wort should be transferred from the kettle to the fermenter, which shouldn’t take more than 15 minutes. All in all, brewing a batch of beer with a BrewZilla can be done in about two hours.

How much beer does the Grainfather make?

The Grainfather brewing system can make anywhere from 2 to 10 gallons of beer, depending on the size of the batch. Many customers commonly brew 5 gallon batches for a more consistent result. Some customers have even gone up to 10 gallon batches.

Brewery grade components provide a reliable brew day and accuracy to creativity, allowing brewers to make a wide variety of different styles of beer. The all-in-one design of The Grainfather allows you to mill the grain, add your hops and yeast, and boil the wort in one single unit.

The stainless steel boil kettle and counterflow wort chiller give you an edge when competing in competitions and even achieve distinction for home brewers. Making beer with The Grainfather allows you to save time and energy, simplify your brewing process and make delicious beer for many years to come.

Is it worth getting a Grainfather?

Whether or not it is worth getting a Grainfather depends on a few factors. If you are already an experienced brewer, a Grainfather may not be necessary, as you may already have the equipment that you need.

However, if you’re interested in brewing all-grain beers, a Grainfather is a great choice because it allows you to control the temperature and times of the mash, boil and ferment. Furthermore, the Grainfather’s innovative counterflow chiller can cool the wort much faster than traditional chillers.

This means that you can have your beer ready to drink much sooner. The Grainfather also lets you set up a fermentation temperature for your wort with its built-in temperature controller, giving you more flexibility and better flavor profiles.

On top of that, the Grainfather has a built-in battery and can be operated with a smartphone app. Ultimately, it is up to you to decide if the convenience and quality of a Grainfather is worth the investment.

What is the maximum grain bill for a Grainfather?

The maximum grain bill for a Grainfather is roughly 23.7 lbs. depending on the type of grain you are using. This means that you can brew a 10 gallon all-grain batch with the Grainfather, which is suitable for most craft brewers.

When using smaller grain varieties such as wheat or oats, the maximum grain bill may be even higher. If you are looking to brew a larger batch size, you will need to look into purchasing an additional sparge arm or rolling wire.

Additionally, you should take proper care to ensure that a wort run-off time of 90 minutes or less is maintained. This will help to minimize any stuck mashes or potential boil overs.

Does Grainfather make good beer?

The Grainfather is a great product that can be used to make excellent beer. It provides users with a simple yet effective all-in-one brewing system that allows them to go from grain to glass with ease.

By utilizing its high-quality components and precise temperature control, you can easily create a wide variety of styles without sacrificing flavor or quality. The Grainfather system also allows for easy clean up, giving you more time to enjoy your beer.

The versatility and ease of use the Grainfather provides makes it a great choice for brewing your own beer at home. Additionally, the wide variety of recipes that are available through the Grainfather’s community can help you create innovative and delicious beers.

All in all, if you’re in the market for a brewing system that produces good beer, the Grainfather is an excellent choice.