A keggle is a type of brewing vessel made from a repurposed 15.5-gallon keg. It is used primarily in homebrewing beer and is a convenient and cost effective way to brew bigger batches. Rather than buying the traditional all-in-one brewing systems which can be expensive, purchasing a keggle is an inexpensive solution to getting all the components you need to start homebrewing.
The keg can be re-purposed with an easy conversion using a few basic components. The keg can be used for both the mash and boil functions of brewing, as well as for housing and cooling the finished beer.
The keggle also benefits from the additional useful double-wall insulation of the original kegs which provides an extra layer of safety when homebrewing. The thickness of the steel also helps with insulation and retention of heat.
To equip the keggle for use, the lid and interior membrane will need to be removed and the keggle welded or soldered with stainless steel components such as a weldless ball valve, a false bottom, a thermowell and a spigot.
With all these components installed, the keggle can be used as a homebrew vessel, with heating and cooling capability, as well as giving you easy access to the beer.
What word is keg?
Keg is a type of container used for dispensing alcoholic beverages like beer, cider, and wine. It is usually made of aluminum or stainless steel and is filled with beverage from a pressurized container, generally a beer keg.
The pressurized container forces the beverage out of the keg and into a glass or cup. The most common size of a keg is 13.2 gallons, which typically contains 165 12-ounce servings. Kegs have become popular in the dining and social scene, as they provide an easy way to serve large groups of people quickly and with little mess.
How do you polish Keggle?
Keggle polishing is a method of restoring old beer kegs to make them look like new. First, you should remove any old labels and clean the keg with soapy water, then rinse thoroughly. Next, you’ll need to scrub the keg with a wire brush or steel wool to remove rust and debris.
You’ll then need to sand the keg down with a fine-grit sandpaper before applying a wax sealant to prevent any further rusting. Finally, you can use a buffer to give the keg a nice, shiny look. Make sure to wipe away any dust and debris regularly during the process and only use materials specifically designed for keg polishing.
Following these steps will help you achieve the perfect, polished finish for your keg.
How do you make a keg out of a kettle?
Making a keg out of a kettle is relatively simple and only requires a few items. You’ll need a kettle that is large enough to hold beer, along with a spigot, a rubber stopper, a tube, clamps, and a CO2 regulator with tank.
Start by drilling a hole near the bottom of the kettle for the spigot, taking care that the hole does not go all the way through. Place the spigot in the hole and secure it on the outside of the kettle.
Place a rubber stopper in the kettle and attach one end of the plastic tube to it. Thread the other end of the tube through the spigot and secure it in place with clamps.
Connect the CO2 regulator to the plastic tube and turn the gas on to carbonate the beer inside the keg. Monitor the pressure and adjust the regulator as needed. Store the keg in a cool and dry place and serve the beer using the spigot.
When the beer is finished, rinse out the keg, sanitize it and make sure it is ready for the next batch.
Can you drill a hole in a keg?
Yes, you can drill a hole in a keg. It requires a particular type of drill bit to make sure that the appropriate size and type of hole is made – usually a 1/4″ bit drilled at an angle. Even though it is possible to drill a hole in a keg, it is important to be aware of the consequences.
By drilling a hole into a keg, you are compromising the structural integrity of the keg and could potentially create dangerous situations. For example, when carbonating beer or other beverages in a keg with a hole in it, pressure can build up inside the keg, resulting in the lid being blown off or the keg exploding.
Therefore, it is very important that you use caution in attempting to drill a hole in a keg, and you should always make sure that safety precautions are taken.
How do you cut a stainless steel keg?
In order to cut a stainless steel keg, you will need a few tools, including a stainless steel bandsaw, a cutting disc, a jigsaw, and protective gear such as safety glasses and gloves. To begin, you should use the bandsaw to score a line around the circumference of the keg, then use the cutting disc to cut away the sides of the keg.
If a bandsaw cannot be used, a jigsaw can be used instead. You will then need to create an entry hole for your cutting tool. If using a bandsaw, use the saw to create a hole, then use a jigsaw to cleanly finish it.
If using a jigsaw instead, begin with the jigsaw and finish by smoothing off the edges with a grinding disc. It is important to wear the protective gear, as the angle grinder throws off a dangerous amount of sparks.
Once the entry hole is cut, use the bandsaw to cut a line around the circumference of the keg, then use the cutting disc to cut away the sides of the keg. Finally, use sandpaper to smooth off the edges of the keg, and you’re finished.
What type of metal is a keg?
Kegs are traditionally made from either stainless steel, aluminium, or mild steel. Stainless steel is the most common material used because it is easy to clean, durable, food safe, and resists corrosion.
Aluminium is lightweight and slightly more resistant to corrosion than mild steel, but is not as durable. Mild steel is most often used to make mini kegs, which are typically found in smaller sizes. This type of metal is more susceptible to damage and rust, but is cheaper and easier to form than stainless steel.
For safety reasons, the type of metal used in a keg will vary depending on what beverage is inside and the local regulations, so it is important to research or consult an expert to determine which type is appropriate for your keg.
How many gallons are in a keg?
A keg contains 15.5 gallons, which is the standard U. S. keg size. There are also seventh-barrel kegs, which contain a smaller quantity of about 5.16 gallons, and sixth-barrel kegs, which hold about 6.6 gallons.
Cornelius (corny) kegs also exist, and these are the most commonly used of all the various types. A Cornelius keg can hold up to 5 gallons of liquid.
What can you make out of empty beer kegs?
Empty beer kegs can be used to make a variety of items depending on what you’re looking for and how handy you are. Some possible creations include: a keg-style grill, a fire pit, a cooler, a flower pot, a planter, a desk, a bookshelf, a lamp table, a kegerator, a beer dispenser, a shower head, and a seating area.
Each item can be customized to make it truly unique, and with a little bit of imagination you can come up with something entirely your own. Beer kegs can be used as the basis for any of these items, as long as you take the time to properly clean and prepare the keg for the intended use.
With a little bit of patience, you will have a one-of-a-kind item made out of the empty beer keg that everyone will be talking about.
How do you insulate a mash tun?
Insulating a mash tun is necessary to maintain an even temperature throughout all stages of the mashing process. Insulating the mash tun helps to keep the temperature of the mash constant and helps prevent scorching that could occur on the bottom of the tun when using direct heat.
The easiest way to insulate a mash tun is with a neoprene insulation jacket. This wraps around the outside of the mash tun and prevents any heat loss or gain. The jacket should extend down to the bottom of the mash tun, ensuring complete insulation.
Other insulation materials that can be used include aluminum foil and bubble wrap. The drawback of these materials is that they don’t provide as much insulation as the neoprene jacket. Additionally, they require regular replacement to ensure the highest level of insulation.
Finally, some mashing tuns that incorporate a copper coil also require insulation to prevent heat loss. Copper cooling coils should be wrapped in neoprene insulation for maximum efficiency.
No matter which type of insulation material is used, ensure that it provides complete coverage of the entire mash tun for maximum insulation and temperature control.
What is Reflectix insulation?
Reflectix insulation is a multi-layered, reflective insulation product that is available in rolls, as panels in pre-cut sizes, or as loose-fill cushioning. It has a 5/32-inch-thick insulation core composed of two layers of foil laminate around a layer of polyethylene bubbles.
This core is then covered by two layers of durable, cleanable white polyethylene. Reflectix insulation is highly reflective and is able to reflect up to 97% of radiant energy. This is what makes it so great for a wide variety of uses.
Reflectix insulation can be used in construction and in other applications such as automotive and RV insulating. It can also be used to floor heating and cooling systems, as wall insulation, and even to domestic hot water tanks.
It is also helpful in providing thermal and acoustic barriers, helping to repel heat and reduce noise within the environment. The installation is relatively easy, as well, and can be done with common household tools.
Reflectix insulation is also energy efficient and an economical solution for heating and cooling, making it a great choice for anyone looking to reduce their energy costs. Additionally, the insulation is mold-resistant and non-corrosive, helping to make it last longer and perform better over time.
Ultimately, Reflectix insulation is a great choice for those looking for an efficient and cost-effective solution for a variety of applications.
How do you keep a 55 gallon drum from freezing?
If you need to keep a 55-gallon drum from freezing, there are several options available. The first thing to consider is the environment the drum resides in. If it is inside, a simple solution could be to bring the room temperature up slightly.
A space heater or other equally safe heating source may be used to keep the area warm. If it is outdoors and is exposed to cold weather, then it may be necessary to insulate the drum. You can either choose to use a drum insulation wrap specifically designed for this purpose or build your own with layers of bubble wrap, foil, and plastic sheeting.
In extreme cases, it may be necessary to actively heat the area with a heater. Keep in mind that all potential heating solutions should be carefully evaluated for potential hazards.
How do you keep water from freezing in a barrel in the winter?
One way to keep the water from freezing is to ensure that it is not exposed to the freezing temperatures by using insulation. This can be done by using an insulated cover or wrapping the barrel in insulation such as a thick blanket or foam wrap.
Additionally, placing the barrel inside a structure such as a garage or shed can help keep the temperature around the barrel warm enough to prevent freezing.
If the barrel is housed outdoors, then the use of an electric heating element or exploring the use of a glycerin based antifreeze can help keep the water from freezing. For larger barrels and tanks, a more efficient and cost-effective solution might be to use underground water lines or buried heating cables.
These methods redirect the heat generated by the earth to keep the water from freezing.
Lastly, you can use a submersible water pump to move the water from the barrel. This can help keep areas of the water from not freezing as the water is being circulated. Additionally, the pump can be outfitted with a heater to keep the water from freezing.
Can I do blown in insulation myself?
Yes, you can do blown-in insulation yourself. However, it is recommended that you hire a professional to ensure proper installation. Blown in insulation is a type of loose-fill insulation that is great for insulating hard to reach places and existing walls.
Blown in insulation requires some specific equipment, such as an insulation blower, hoses, and face masks. These items can be rented or purchased at most home improvement stores. If using blown in insulation, it’s important to follow all safety guidelines and instructi.
Is blown in insulation worth it?
Some of the primary considerations include: climate, cost of materials and installation, type of home, and desired results.
In general, installing blown in insulation is most beneficial in regions with cold winters and hot summers. This is because the insulation helps to keep heat in during the winter and out during the summer.
As a result, homes in these regions see the greatest drop in energy bills after installation.
The cost of blown in insulation varies depending on the type of insulation used, the size of the area being insulated, and the cost of labor. However, in most cases, the cost is lower than other types of insulation, such as spray foam.
The type of home is also a factor to consider when deciding whether or not to add blown in insulation. In general, homes with attics are the best candidates for this type of insulation. This is because the insulation can be added directly to the attic floor, which is typically easy to access.
However, homes without attics can also be insulated, though the process is typically more difficult and expensive.
The main purpose of blown in insulation is to improve energy efficiency. However, this is not the only benefit. Blown in insulation can also help to improve indoor air quality by trapping pollutants and allergens.
Additionally, it can help to reduce noise pollution by absorbing sound.
Overall, blown in insulation is an effective way to improve the energy efficiency of your home. It can also help to improve indoor air quality and reduce noise pollution. However, the cost of materials and installation should be considered before making a decision.
How does a mash tun work?
A mash tun is a vessel used in the brewing process to steep grains in hot water, which is known as “mashing. ” During this process, enzymes in the grains convert starches into sugars, providing a sweet flavor and giving the wort (unfermented beer) its body and character.
The mash tun acts as the base from which all beer is brewed.
The mash tun is filled with grains and hot water, which activates the enzymes in the grains and starts the conversion of the starches into fermentable sugars. The temperature of the mash is usually around 66-67°C, although some styles of beer, such as wheat beers, require higher temperatures.
Typically, the mash is left to sit for around 60 minutes.
Once the mash has been steeped, it is then transferred to a boiling vessel, where it is boiled for around 90 minutes with hops, which adds bitterness and aroma to the beer. After the boil is complete, the wort is then transferred to a wort chiller, where it is cooled down quickly to around 20-22°C, and then transferred to a fermentation vessel where yeast is pitched, and the fermentation process begins.
The mash tun is an integral part of the brewing process, as it is essentially responsible for the beer’s character, body, flavor, and aroma. As such, the mash tun can play a huge role in defining the flavor of a particular beer.
What is a false bottom in a bag?
A false bottom in a bag is a feature that creates concealed storage space by building up the bottom of the bag. It can be created by adding simple components like cardboard or a piece of wooden board that is placed between two pieces of fabric.
The false bottom will create an extra layer of space by adding thickness and also helps to keep the bag’s contents from being hidden from view. By adding a false bottom, the inside of the bag can be divided into separate compartments for specific items or for items which may be too large or fragile to fit at the bottom of the bag.
A false bottom can also act as a barrier to protect the contents inside the bag from things like dust and weather, as well as making the bag more aesthetically pleasing.
