Skip to Content

What size thread is a ball lock post?

The size of thread for a ball lock post will vary depending on the manufacturer as different brands may use slightly different sizes. Generally speaking, the thread used for a ball lock post is a 5/16″ – 18 UNC thread, which is a standard U.

S. thread size. However, some brands (such as KegLand) use a proprietary thread size of 6. 35 mm – 15. 88 UNC. It is important to check the thread size before selecting a ball lock post to ensure compatibility with your other parts.

What size are corny keg posts?

The posts on corn kegs, or Cornelius kegs, vary in size depending on the type of keg you purchase. The most common post size for Cornelius kegs is a 6-16 fitting, one of the smallest type of fittings.

The 6-16 fitting is a standard male post that screws onto a Cornelius keg. It measures 6/16″ in size and is usually made of brass or stainless steel. The threads on a 6-16 fitting are smaller than those on most other kegs and can be hard to get a good seal, but they are perfect for smaller batches of beer.

In addition to the 6-16 fitting, Cornelius kegs also have a 5-16 fitting. This post is larger than the 6-16 and is typically used for larger batches of beer. The 5-16 post measures 5/16″ and is usually made of stainless steel or brass.

The threads on a 5-16 fitting are slightly larger than those on the 6-16, making them easier to get a good seal.

Cornelius kegs are also available with 7-16 and 8-16 fittings. These fittings are the largest available on kegs, and are best used for larger batches of beer. The 7-16 fitting measures 7/16″ and is usually made of stainless steel, while the 8-16 fitting measures 8/16″ and is also typically made of stainless steel.

The threads on the 7-16 and 8-16 fittings are larger and make it easier to get a secure seal.

No matter what size post you choose for your Cornelius keg, make sure you get one that fits properly and securely on your keg. A good fit will ensure that you get the best tasting beer possible.

Are ball lock and pin lock posts interchangeable?

No, ball lock and pin lock posts are not interchangeable. Ball lock posts are for fitting Cornelius-style kegs that require an interference fit. The posts feature a ball-shaped connection, where the ball-shaped port on the keg fits into the ball-shaped port on the post.

Pin lock posts, on the other hand, feature a pin-shaped connection, where the pin-shaped port on the keg fits into the pin cap from the post. This is intended for fitting Pepsi-style kegs. Because ball lock and pin lock posts have different connection styles, they are not interchangeable.

What is the difference between ball lock and pin lock kegs?

Ball lock and pin lock kegs are both used for storing and serving beer, but there is a significant difference between the two styles. Ball Lock Kegs use two snap-on couplers, one for gas and one for liquid.

The gas-in coupler has a ball-shaped end, while the liquid-out coupler will have two pins. This design is great for quick disassembly and assembly.

Pin Lock Kegs use two pins connections on both the liquid-out and gas-in couplers. This design requires two different kinds of disconnects, making it more difficult to disassemble and assemble. Pin Lock Kegs are slightly more lightweight than Ball Lock Kegs but are typically seen as less durable.

Beyond the couplers, the Ball Lock Kegs usually feature a wider lid opening, making them much easier to clean. Both type of kegs require a keg tap, but Ball Lock Kegs tend to be more compatible with different tap options.

Thus, most brewers prefer to use Ball Lock Kegs over Pin Lock Kegs.

How many PSI can a beer keg hold?

A beer keg generally has a strong metal structure in order to maintain a high amount of pressure and so can hold between 10-14 PSI of pressurized carbon dioxide or nitrogen. The typical pressure for the traditional American beer is between 11-13 PSI and cannot exceed the upper limit of 14 PSI.

This pressure is necessary in order to push the carbon dioxide or nitrogen into the beer in order to provide carbonation and flavor stability. Generally, the temperature of the beer is kept between 35°-45°, so the appropriate PSI must be maintained that is compatible with that temperature range in order to keep the beer fresh and provide an enjoyable drinking experience.

What is a MFL connection?

A MFL (Male Flare Lock) connection is a type of connector commonly used in plumbing. It is so named because it is made up of two components: a male section and a flare female section. The male section is a straight pipe that is slightly tapered at the end—this allows for easy insertion into the flare female section.

The flare female section features a flared lip which provides an air-tight seal when the two pieces are connected. MFL connections are most commonly used to connect plastic and brass pipes, as well as to connect metal fittings to plastic or brass pipes.

The advantage of using an MFL connection is that it requires very minimal tools and can be completed quickly and easily. Additionally, the connection is extremely sturdy and secure.

How do I know what type of corny keg I have?

It can be tricky to identify the type of corny keg you have without looking at the manufacturing details. Here are some points to consider that can help you determine which type of corny keg you have:

First, you can look for the logo of the manufacturer stamped onto the keg. The most popular manufacturer of corny kegs is Cornelius, which has the distinct logo of a cloverleaf. Other popular manufacturers include Spartan Reform and Firestone.

Second, you can measure the size of the keg, which is usually inscribed or stamped onto the body of the keg itself. Corny kegs come in a variety of sizes, including 2.5, 3, 3.5, and 5 gallons.

Third, The external shape of the keg will help you identify the type of corny keg you have. For example, the most common variety of corny keg is cylindrical, but there are also square and rectangular shapes.

Finally, you can consult your local home brew supply store, which should be able to quickly identify the type of corny keg you own. They can also point you to the right supplies or parts necessary to get the most out of your corny keg.

What are the different types of kegs?

There are several different types of kegs available on the market, each of which is suited for different types of beverages. The most common types of kegs are:

1. Half Barrel Keg (also known as a full-size or “standard” keg): These are the most common type of keg available, and typically hold about 15. 5 gallons, or around 160 12 oz. beers. These are a good choice for larger gatherings or bars and restaurants.

2. Quarter Barrel Keg (also known as a pony or slim quarter): These are smaller than the full-size keg, and typically hold 7. 5 gallons, or around 80 12 oz. beers. These are great for large parties or smaller gatherings.

3. Sixth Barrel Keg (also known as a sixtel or torpedo): These are even smaller than the quarter barrel, and typically hold 5 gallons, or around 40 12 oz. beers. These are ideal for smaller gatherings or large parties where beer will be consumed quickly.

4. Cornelius Keg (also known as Cornelius or Corny): These are the smallest type of keg and can hold around 5 gallons, or around 40 12 oz. beers. These are an excellent choice for home brewers who only require small amounts of beer at a time.

Overall, the type of keg you choose will depend on how much beer you need for a particular event or occasion. It’s important to keep in mind that with larger kegs, you’re less likely to waste beer as it will keep longer and not go bad.

How do you tap a ball lock keg?

In order to tap a ball lock keg, you must first make sure to have the correct equipment on hand. This includes a CO2 tank, regulator, air line, disconnects, and all necessary fittings. Before tapping the keg, ensure the CO2 tank is connected properly to the regulator and that the regulator is properly set to the desired pressure, typically at 10-12 PSI.

Connect the air line to the gas-in post on the top of the keg, and connect the opposite end of the line to the gas-in fitting on the regulator. Open the lid of the keg, lift the pressure relief valve, and unseat the dip tube.

To tap the keg, connect the liquid line to the liquid-out post on the keg, then attach the other end of the line to the liquid-out fitting on the regulator. Once everything is correctly connected, slowly open the valve on the gas-in line and then release the pressure relief valve on the top of the keg.

Allow the keg to pressurize for approximately one minute before placing it in storage or serving. Make sure to periodically check on the keg to ensure the desired level of pressure is maintained. When it comes time to untap the keg, simply turn off the gas valve and release the pressure relief valve to release the CO2 from the keg.

How do you convert Sanke to Ball Lock?

Converting a Sanke keg to a Ball Lock keg involves making a few modifications. Firstly, you will need to obtain a ball lock conversion kit. These kits typically come with a new top lid and pressure relief valve, as well as a 3 piece poppit valve.

You will also need a hand-operated drill with a drill bit slightly large than the poppit valves.

Once you have all the necessary parts, you can begin with the conversion process. Start by removing the original Sanke lid and the oval lid clamp. This will give you access to the poppit valves. Remove both the gas poppit and beer poppit with the hand-drill, taking care to not damage the post or liquid line.

Next, drill out the center of the Sanke lid post. This step will allow the new poppit valve to fit properly. Ensure that the depth of the center hole is correct and check for sharp edges inside the post.

Use the 3-piece poppit valve to replace the old Sanke poppit valves and make sure to attach the new pressure relief valve securely. Dab a small amount of food-grade silicone sealant around the post for a tight fit.

Now you can attach the new ball lock lid and put the original Sanke lid clamp on.

After a complete leak test and sanitizing, your Sanke keg is now converted to a Ball Lock keg. Enjoy!

How do you attach ball and lock attachments to a corny keg?

When attaching a ball lock or pin lock connection to a corny keg, you first want to make sure the posts are clean. Scrub the posts with a cleaning brush and solution to make sure they are free of contamination and then rinse with clean water.

After cleaning the posts, you can attach the attachments. Ball lock attachments have two posts, one labeled “IN” and the other labeled “OUT” which correspond to the pressure release posts located on the lid of the keg.

The “IN” post should be attached first, followed by the “OUT” post. Pin lock attachments also have two posts which are identified by the number of pins on the post. Attach the “Gas” post first, followed by the “Liquid” post.

Once the attachments are securely attached, attach the gas line to the “IN” post and the beer line to the “OUT” post. Make sure all connections are secure before using the keg. Once the lines are attached, you can adjust the pressure by using the PVC valve on the gas line.

How do I know if my ball lock is pin locked?

To determine if your ball lock is pin locked, you will need to inspect the head of the lock. Locks that are pin locked have a small pin situated at the center of the oval slot where the key is inserted.

A pin lock is a high-security lock, which means it is more difficult to pick or manipulate than a standard ball lock. If the key slot doesn’t have a pin at the center, then you know the lock is not pin locked.

Additionally, you can examine the lock’s housing to identify whether it has been reinforced with a pin. If the housing around the key slot has a visible protrusion, then the lock has been pin locked.

Although this is not visible on the outside of the lock, it is possible to detect it when the housing is opened.

What is a Pepsi style keg?

A Pepsi style keg, otherwise known as a ColaKeg, is a container designed to hold large amounts (generally 5 gallons) of carbonated beverages. They are primarily used to dispense soft drinks such as Pepsi, Coca Cola, and root beer at events such as parties and other gatherings.

They are generally made of stainless steel, but can also be made of aluminum and plastic. ColaKegs are similar to draft beer kegs, but are smaller, lighter and require no tapping or special equipment to use.

When ready for use, the kegs should be chilled for several hours prior to serving, and the gas and liquid components connected. The gas is used to pressurize the keg, forcing the drink up and out of the spout when a valve is opened.

Without the gas, the liquid won’t flow from the keg.

What type of kegs are there?

Which is a 15.5 gallon keg (or 1/2 Barrel Keg), a sixth barrel keg (a 1/6 Barrel Keg), a Cornelius keg (a 5 gallon Keg), and a mini keg (a 1.32 gallon Keg).

The half keg is the most popular of these types; it is tall, cylindrical, and typically made of stainless steel. It is commonly used for storing beer, as it has a high capacity for large volumes of beer, and is also relatively easy to move around.

The sixth barrel keg is the next most common type and is very similar to the half keg, except it is shorter and has a capacity of nearly 5 gallons. These kegs are often used in bars, restaurants and other commercial facilities.

The Cornelius keg is also known as a “Corny Keg” or a “soda keg. ” This is a very popular size for home and craft brewers, as it has a small capacity of 5 gallons. It is also made of stainless steel and is much easier to move around than the larger, full-sized kegs.

Finally, the mini keg is the smallest option, usually made of aluminum and with a capacity of 1. 32 gallons. These are the perfect choice for home brewers who are looking for small batches of beer or who want to transport their beer in smaller amounts with greater ease.

How do you replace a corny keg post?

Replacing a corny keg post is an easy process that requires just a few simple steps. To begin, make sure that your corny keg has been depressurized, and the keg, lid, and posts have been all cleaned and sanitized.

Once the keg and components have been sanitized, you can begin to replace the post. To do this, start by unscrewing the tank lid, and removing the polymer washer from the center of the lid. After that, you can remove the old post from the keg.

To install the new post, begin by inserting the post and threading it into the keg. Be sure to thread the post snugly, but not so tight that you strip the threads. Once threaded, push the post into the keg, until the top of the post is flush with the top of the keg.

Next, push the polymer washer onto the post to create an air-tight seal between the post and the keg body. To make sure that the seal is tight, cover the top of the post with your thumb and press it.

Once the washer is in place, screw the tank lid down tight to create a secure seal.

Finally, inspect your work to make sure everything is snug and secure and you’re all set! After inspecting, you can re-pressurize the keg and carry on with your usual serving routine.

Why did they stop making beer balls?

Beer balls were a popular novelty item in the United States from the 1980s to the early 2000s. The product was essentially a one-liter ball-shaped plastic bag filled with beer, and it quickly became popular because of its convenience and novelty.

However, beer balls eventually vanished from store shelves due to several factors.

One of the primary issues was that beer balls were seen as a novelty item, rather than something to be taken seriously. This took away any opportunities for the product to become a larger success. Additionally, the cost of packaging and transporting beer balls was relatively high, making it difficult for manufacturers to make significant profits.

To add to the issue, concerns about underage drinking also played a role in their decline. Despite the fact that it was usually illegal for minors to buy beer in any form, many parents and legislators found beer balls to be especially tempting for minors because of their novelty factor and fun packaging.

This prompted many states to pass legislation banning the sale of beer balls, further eliminating the product’s chances of being successful.

Ultimately, the combination of all these factors was enough to cause beer balls to eventually disappear from store shelves.

What is keg ball cricket?

Keg ball cricket is a modified form of the well-known game of cricket. It is played using a keg filled with water, two bats, and a set of plastic balls. Instead of a traditional cricket ball, keg ball cricket utilizes the heavier and softer balls to reduce the risk of injury.

In addition, the use of a keg adds elements of strategy and complexity to the game, making it more challenging and entertaining.

Keg ball cricket is an ideal game for a group of friends or family. As with regular cricket, two teams are formed and one team bats while the other fields. The players use the bats to hit the balls towards the opposite side of the field.

The keg serves as a makeshift wicket which, if hit, results in the batsman being dismissed. There are various scoring opportunities, and the team with the most runs at the end of the game is declared the winner.

Unlike regular cricket, keg ball cricket can be played indoors or outdoors, on any type of surface. This makes it suitable for all age groups and skill levels. The game also requires less space, so it can be played in a cramped setting.

Keg ball cricket is a unique and fun way to enjoy the game of cricket. With its easy setup and rules, it’s an ideal way to share the joy of cricket with others without the same risks associated with standard cricket.