The ball lock system is actually designed to use either gas or liquid. There are two different types of ball lock systems, known as the gas and liquid “posts”. The gas post is typically the longer of the two and has two openings, whereas the liquid post is typically the shorter of the two and has one opening.
Gas is forced through the two openings on the gas post and is then tightly secured by the ball lock. The ball inside the post will move freely when the post is not pressurized, but will secure tightly when it is pressurized.
The liquid post has only one opening, and is designed to allow liquid in, but not gas. The ball lock secures the liquid inside the post and prevents it from escaping.
How do I know if my ball lock is pin locked?
If you have a ball lock, you can easily tell if it is pin locked by closely inspecting the top of the lock. There should be a metal pin or a metal bar across the inside of the lock. If the pin or bar is inside the lock, then it is likely pin locked.
Another sign that the lock is pin locked is if the key is inserted only part way into it. If the key won’t go all the way into the lock, then it is likely pin locked. It may also be harder to turn the key if the lock is pin locked.
If the lock does not have a metal pin or bar inside, then it is not pin locked.
Are gas and liquid disconnects interchangeable?
No, gas and liquid disconnects are not interchangeable. Gas disconnects are designed to handle the higher operating pressures of gas service, while liquid disconnects are designed to handle the lower operating pressures of liquid service.
Additionally, the two types of disconnects use different materials of construction. For instance, gas disconnects typically use forged brass while liquid disconnects are often made of brass or stainless steel.
Additionally, gas disconnects may feature additional safety features, such as pressure relief devices or check valves, which are not found on liquid disconnects. For these reasons, it is not recommended to use a gas disconnect for liquid service, or vice versa.
How does a ball lock keg work?
A ball lock keg works by having a tank connected to a pressure-tight head, which has two sets of poppets, an inner set and an outer set. The inner set of poppets is connected to a liquid port and is used to dispense beer.
The outer set of poppets is connected to a gas port, and is used to deliver pressurized gas to the tank. The poppets are controlled by a lever mechanism, and they open and close when the inner and outer poppets meet and lock into place.
This process creates a secure seal, allowing pressurized gas to keep the beer inside the keg, and also to force the beer out when it is dispensed. The head of the tank also has an airtight lid, which is secured with a latch to provide easy access for cleaning and filling the tank with beer.
What is a Sanke keg?
A Sanke keg is a type of stainless steel keg commonly used in commercial settings for the draught beer industry. The name is derived from the German word ‘Sanke’, which means ‘container’. Sanke kegs are usually built with one or two unthreaded openings—one at the top and another at the bottom, and each with a different size and shape.
The opening at the top is slightly larger and is used for pressurizing the keg with CO2 and for filling it with beer, while the bottom one is smaller and is used for tapping the beer. Sanke kegs are also capable of storing and dispensing other beverages, such as cider, wine, and soft drinks.
They often come in different sizes and capacities, typically ranging from 15 to 50 liters. Sanke kegs are used for the continuous flow of drinks which eliminates the need for pouring each glass separately.
This helps save both time and money for bars, pubs, and restaurants.
Are ball lock and pin lock posts interchangeable?
No, ball lock and pin lock posts are not interchangeable. Ball lock posts use a ball-shaped, spring-loaded locking mechanism, while pin lock posts use a cylindrical, pin-shaped locking mechanism. While these two types of posts may look similar, they cannot be used interchangeably.
Additionally, the thread sizes of these posts often differ, and so a ball lock post cannot be used in place of a pin lock post, or vice versa. It is important to take note of the type of post when purchasing replacement parts for a keg, as using the wrong post could lead to difficulties with connecting and disconnecting the keg from the liquid or gas line.
Can you convert pin lock to ball lock?
Yes, it is possible to convert a pin lock to a ball lock. However, it is important to be aware that this conversion may not be easy and might require special parts and tools. Depending on the type of pin lock you have, you may need to purchase specific parts in order to complete the conversion.
Additionally, it is also important to determine whether or not the keg you have is compatible with the new ball lock. If it is not, you may need to purchase a new keg to make the conversion possible.
Furthermore, you will also need to ensure that you are familiar with the process of converting a pin lock to a ball lock, as it requires an understanding of the various tools and equipment needed to complete the process.
Finally, depending on the level of difficulty of the conversion, you may need to hire a professional who specializes in this type of work.
What is Amcyl keg?
An Amcyl keg is a stainless steel keg that is commonly used in bars, pubs, and restaurants to store and dispense beer. These kegs are typically made of two pieces: an inner liner, and an outer shell.
The inner liner is constructed of food grade stainless steel and acts as a container for the beer, while the outer shell is made of a sheet metal that is designed to be both sturdy and aesthetically pleasing.
The sides of the Amcyl keg are designed to be easily removable with a pull tab or a hand-held tool, allowing the user to quickly access the contents of the keg. Inside the keg, the contents are held in place by an airtight seal.
Amcyl kegs are popular among commercial establishments because they are reliable, easy to maintain, and have a long service life. Additionally, the material used in these kegs is Recyclable Aluminum Metallized and approved for direct contact with food and beverages.
What is a ball lock in plumbing?
A ball lock is a type of plumbing fitting that is used to connect two pipes together. It consists of a male and female adapter, which are connected by a ball-shaped valve. The ball lock is opened and closed by turning a knob, which allows the flow of water through the connection and allow it to be shut off without having to remove the entire connection.
The ball lock is most often used in flexible hose systems, such as those found in washing machines, showers, and dishwashers. It’s also widely used in garden hoses and other water-related appliances.
The ball lock is a popular choice as it is durable and provides a secure connection that won’t easily come apart. It is also relatively easy to install and requires minimal maintenance.
How do keg disconnects work?
Keg disconnects are devices that are used to connect and disconnect dispense lines from kegs. They are usually composed of two parts, the male part connects to the keg, while the female part connects to the line.
Some products have just one disconnect for both the gas and liquid lines, while others have separate disconnects for each.
Keg disconnects work by using a ball-lock system. The male part has pins that are depressed by the female part when it is attached, allowing gas and liquid to flow through the internal passages. When the male part is attached to the keg and the female part is attached to the line, the pins will be pushed in, creating a secure connection, and allowing for the beer to flow out.
To disconnect the male part from the female part, the pins are released and the two parts can be separated.
Keg disconnects are an important part of any system that drafts beer, and they ensure that the beer is safely dispensed and the system is still secure. They provide an easy and efficient way to connect and disconnect the lines, and they help keep the beer safe throughout the entire process.
Can you disconnect and reconnect a keg?
Yes, you can disconnect and reconnect a keg. However, it is a difficult task that requires specialized equipment. First, you must depressurize the keg using your CO2 regulator by turning off the CO2 and removing the keg coupler.
Then, you must disconnect the liquid line from the coupler in order to separate the two components. At this point, you can unscrew the coupler from the gas line and move it to a new keg. Once the coupler is attached to the new keg, you can then reattach the liquid line followed by reattaching the CO2 regulator and pressurizing the keg.
Taking these steps will allow you to easily transition between kegs without having to empty the old one first.
How do you connect keg coupler lines?
Connecting keg coupler lines involves several steps. First, start by disconnecting the gas line from the keg coupler by releasing the gas relief valve. Once the gas line is disconnected, unscrew the liquid quick connect from the keg coupler.
Then, unscrew the liquid line from the coupler and discard the washer inside. Once the washer has been discarded, attach the new liquid line to the coupler and make sure that it is firmly attached. Make sure that the liquid line is routed in the correct direction and free from kinks.
Finally, reconnect the gas line to the coupler and turn the relief valve back on. Make sure the connection is securely fastened and that the liquid and gas lines are not crossed. Once the new liquid line is connected and the gas line is reattached, test it out and make sure it is running smoothly.
How do you release pressure from a keg?
Releasing pressure from a keg is a straightforward process that starts with locating the pressure release valve on the side of the keg. To do this, simply remove the lid or top of the keg and locate the valve, which should look like a circular disk on the side of the keg.
Once located, you’ll need to remove the red cap or pull ring from the valve in order to access the valve itself. After the cap or ring is removed, the pressure release valve should easily turn from a horizontal to vertical position.
As the valve is moved, a slight hissing sound may be heard as the pressure is being released from the keg. As the pressure is released, the lid or top of the keg may lift slightly as the pressure inside equalizes.
You will know the pressure has been fully released when no more gas or liquid can be seen escaping from the valve.
Once the valve has been released, carefully turn the valve back to its original, horizontal position, and follow up with replacing the red cap or pull ring. After this is complete, you should check the pressure inside the keg to make sure it is at the desired level.
At this point, the pressure inside your keg should be successfully released.
What is the thread of a Corny keg post?
The thread of a Corny keg post is the piece of plastic on the top of the keg with the small hole in it. It is what the Corny keg lid, disconnects, and other attachments such as gas lines or beverage lines are connected to.
The post threads are typically referred to as “Tri-Clamp” or “Sankey” style and are designed to give a tight seal, which prevents any leaks, that could cause an issue such as off flavors in the beer.
The posts typically come with a gasket in order to give a better seal, and the post threads are often stainless steel, aluminum, or plastic. The most common thread size for a Corny keg is 1/4″ Barbed, which tightens with a standard nut.
How do I know what type of Corny keg I have?
If you are unsure of the type of Corny Keg you have, there are a few things you can check to determine what type of keg you have.
First, check the diameter of the keg. Corny Kegs come in two sizes, which are referred to as “ball lock” and “pin lock” kegs. Ball lock kegs are typically 2. 75 Gallons and measure 19″ high and 8. 5″ wide.
Pin lock kegs are typically 3. 5 Gallons and measure 24″ high and 8. 75″ wide.
Next, examine the connectors on the top and bottom of the keg. The connectors on a ball lock keg are round with two flat notches, while the connectors on a pin lock keg are rectangular with two pins.
In addition, you should consider the number of valves on the keg. Ball lock kegs have a single gas-in and a single liquid-out post, while pin lock kegs have two gas-in and two liquid-out posts.
If you still cannot determine which type of Corny Keg you have, it is best to consult a keg specialist or check online resources to find out the exact type of keg you own.
How wide are corny kegs?
Corny kegs come in a variety of sizes, but the most common size is the 5. 0-gallon Cornelius keg, which measures approximately 9. 25 inches in diameter and 23. 3 inches in height. A 1. 5-gallon “mini” Corney keg is 8.
5 inches in diameter and 17. 5 inches in height, and a 2. 5-gallon “quarters” Corney keg is 9. 25 inches in diameter and 16. 75 inches in height. It is important to keep in mind that the total size of a keg can vary slightly based on factors such as the type of valve, pressure relief valve, or other attachments that might be included on the keg.
How long does a keg last once tapped?
Once a keg has been tapped, it will typically last a few weeks before it loses carbonation and flavor. Many factors can affect the longevity of a tapped keg, including the brand and type of beer, storage conditions and environment, temperature, the type of equipment used to dispense the beer, and the severity of use.
Generally, a lightly used keg of lager or light ale stored at around 38-40°F should last 6 to 8 weeks, while a well-used keg of heavily hopped beer or a stout stored at lower temperatures can last 3 to 4 weeks.
What are the dimensions of a 5 gallon corny keg?
A corny keg is a cylindrical container most commonly used for storing and dispensing beer. 5 gallon corny kegs typically measure 23″ tall by 8. 5″ in diameter. The keg body is made from stainless steel with a pressure-rated lid and posts.
The posts are used to connect CO2 tanks, gas lines, and beer lines, allowing for pressure-controlled dispense of the beer. The 5-gallon corny keg holds approximately 10. 5 gallons of beer when full and can dispense around 165 12-ounce servings of beer.
What are the sizes of kegs?
Keg sizes vary by type and manufacturer, but are generally available in a range of sizes from 1/6 barrel (5 gallons / 19 liters) to 1/2 barrel (15. 5 gallons / 58. 7 liters) and beyond. Most common is the 1/2 barrel (full-size keg), followed by the 1/4 barrel (quarter keg), and then the 1/6 barrel (sixtel).
Keg sizes larger than 1/2 barrel are also available, including the slim quarter (which is the size of a quarter barrel, but shaped like a 1/2 barrel), and various other sizes in the range of 20-60 liters.
As breweries prep their kegs for service, they may also remove some of the inner space of the keg, reducing the standard sizes slightly.
How wide is a half-barrel keg?
A typical half-barrel keg can measure anywhere between 16 and 17 inches in width. The exact size of the keg depends on the manufacturer, but many kegs are designed to fit a standard size tap handle, which also measures around 16 to 17 inches in width.
For reference, a full-size keg has a width of about 23 to 24 inches.
