That depends on the size of your fridge and the size of the keg. An up-right refrigerator will generally hold up to a full-sized keg, but many fridges are not large enough to fit a full-sized keg. Most full-sized kegs are 15.
5 gallons, or just over 62 liters, and measure just under 24 inches in height. If the height of the keg is an issue, you can get a shorter, “tuck-under” style in a slim quarter barrel or slim half barrel sizes.
Quarter barrels measure approximately 9 inches in height, while half barrels measure around 13 inches in height. Additionally, there are smaller “pony kegs” that measure 7.75 gallons and are usually just under 23 inches in height.
If you’re not sure whether your fridge can accommodate a keg, you could measure the inside vertically before purchasing a keg.
How many corny kegs fit in a keezer?
The number of corny kegs that can fit in a keezer will depend on the size of the keezer, as well as the size of the kegs. A standard keezer is usually around 46 inches in height. A slimline keezer is typically around 30 inches in height.
A typical 5-gallon corny keg is usually around 16.5 inches tall and a typical 3-gallon corny keg is around 13.5 inches tall. A standard keezer will typically fit four 5-gallon corny kegs and six 3-gallon corny kegs if they are layered one over the other.
A slimline keezer will typically fit two 5-gallon corny kegs and three 3-gallon corny kegs, again if they are layered one over the other. It is also possible to fit more kegs in a keezer if they are placed side by side instead of on top of each other.
If side-by-side placement is used, a standard keezer can generally fit five 5-gallon corny kegs, and a slimline keezer can usually fit three 5-gallon corny kegs.
How do you make a mini fridge keg?
Perhaps the simplest way is to purchase a mini fridge that is designed specifically for this purpose. These types of mini fridges typically have a built-in tap and keg system, so all you need to do is add your desired beverage to the keg and you’re good to go! If you don’t want to buy a special mini fridge, you can always convert a regular mini fridge into a keg system by making a few modifications.
For example, you’ll need to drill a hole in the fridge large enough to fit a keg coupler, and then you can install a tap system onto the outside of the fridge. With a little bit of creativity and some elbow grease, you can easily turn any mini fridge into a keg system!.
Can you turn a mini fridge into a kegerator?
Yes, you can turn a mini fridge into a kegerator. Since kegs typically take up a significant portion of refrigerator space, you should use a mini fridge that is large enough to comfortably fit your keg.
You may need to remove the refrigerator shelves, drawers, and other removable pieces inside the mini fridge to make room for the keg. Additionally, you will need to buy or build a kegerator conversion kit, which includes an air-tight keg coupler, CO2 regulator, gas line, and faucets.
Once these pieces are installed, your mini fridge can then become a kegerator. Make sure to properly Sanitize your kegs and the conversion kit pieces before use to prevent bacteria build-up. Additionally, you may want to consider getting a dual-tap conversion kit that allows you to switch between different kegs.
How can I make a cheap kegerator?
Making a cheap kegerator is a relatively easy process that involves buying a small refrigerator and converting it into a beer dispenser. To begin, you’ll need to decide what size refrigerator you wish to use and where you plan to put it.
Keep in mind, a full-sized keg will require a larger fridge, while a standard small keg will fit in a smaller refrigerator.
Once you have your refrigerator picked out, you will need to purchase a keg coupler and a beer line. The coupler connects to the refrigerator and the beer line connects to the keg. There are various options on the market, so be sure to do your research before purchasing.
Once you have everything purchased and in place, you’ll need to install the coupler and the beer line. Be sure to do this carefully and according to the instructions. Then, you’ll need to ensure the keg is cold and filled with your favorite beer.
Finally, you can connect the coupler to the keg and correctly attach the beer line to the coupler. Once connected, you can plug in your refrigerator and turn it on. This will begin the cooling process.
You may need to wait a few hours for the beer temperature to reach the desired level before pouring.
Making a cheap kegerator can take some time and effort but will be worth it in the end. Before making any purchases, be sure to research the best options available so you have the right supplies and are following the correct instructions.
How big of a mini fridge do I need for a kegerator?
The size of mini fridge you need for a kegerator will depend on how many kegs you plan to store. At a minimum, you will need a mini fridge that is 5.1 cubic feet, which will fit one full-size American Sankey keg or two sixth-barrel kegs.
If you plan to store more than one keg at a time, you should look for a mini fridge that is at least 7.1 cubic feet, which can fit two full-size kegs. Additionally, you should make sure your mini fridge is equipped with a temperature control so you can adjust it to the ideal temperature for your kegs.
Freestanding kegerators typically come with a compressor and a larger fridge, but mini fridges can easily be converted into kegerators with the addition of a kegerator conversion kit.
How do I run a co2 line through my fridge?
To run a CO2 line through your fridge, you will need to complete the following steps:
1. Begin by attaching the barb connector of your CO2 line onto the CO2 regulator.
2. Run the line through the back of your fridge into the fridge cabinet. Secure with cable straps.
3. Connect the line onto the CO2 lance nipple, which is thread-on type or a quick disconnect.
4. When the regulator is connected to the lance, push the plunger on the regulator in order to activate the flow of CO2.
5. After the initial setup, adjust the regulator to the required pressure for the desired dispense.
6. Close the fridge door and plug in the power cord.
7. Monitor the output pressure, making sure that the pressure does not exceed the maximum limits.
8. When all the settings are done and working, the fridges will gradually get colder depending on their environment.
By following these steps, you will be able to successfully run a CO2 line through your fridge.
Can I remove the freezer from my mini fridge?
Yes, you can remove the freezer from your mini fridge. To do this, you need to locate the screws that are holding the freezer to the fridge and release them. After this, you can carefully pull the freezer out of the bottom of the refrigerator.
If necessary, you can defrost the freezer before removal. Once the freezer is removed, you should make sure to properly dispose of it.
What size freezer do I need for a keezer?
The size of the freezer you need for a keezer will depend on two factors: the official capacity of your keezer, as well as how much beer you plan to store in it. Generally, a keezer will fit one standard keg per cubic foot, so if you have a 5 cubic foot keezer, you’ll need at least a 5 cubic foot freezer.
If you plan to store multiple kegs in your keezer – perhaps some homebrew and some store-bought – then you may want to go with a larger size. A larger capacity freezer will allow you to store more beer, plus it will give you some extra space to accommodate a temperature controller, carbon dioxide tanks, and other kegerator accessories.
What is a keezer homebrew?
A Keezer homebrew is a type of home brewing and beverage dispensing system that is made from a converted chest freezer. It is a cost-effective and space-saving solution for those who would like to brew and dispense their own beer or other beverages at home.
The main components of a Keezer homebrew system includes a chest freezer, a temperature controller, a carbon dioxide (CO2) regulator, connecting hoses, and a tap system. Converting a chest freezer into a Keezer homebrew system involves a few basic steps including insulating the freezer to maintain the desired temperature and attaching the necessary hardware.
The temperature controller and CO2 regulator allows the user to keep track of and adjust the amount of CO2 and the temperature of the beer inside the Keezer, while the tap system allows the user to enjoy their freshly brewed beer.
What size fridge fits a keg?
When choosing a fridge to fit a keg, it is important to consider the size of the keg. Standard keg sizes are either 5-gallon or 15.5-gallon kegs. The circumference of a 5-gallon keg is between 14-15 inches and a 15.
5-gallon keg is approximately 23 inches. Therefore, a fridge that is at least 16 inches in diameter is needed for a 5-gallon keg and 26 inches for a 15.5-gallon keg. It is important to keep in mind the measurements of the fridge are often the measurements at their widest points and door handles may increase the size further.
A cavernous amount of space is not necessary to fit a keg; if desired you can opt for a mini fridge to accommodate your beer needs. These mini fridges often range between 12-15 inches in interior diameter and can store either a 5-gallon or a 15.
5-gallon keg with ease.
Remember to check the height of the fridge too as many kegs are approximately 23-24” tall when standing upright, so you need to make sure your fridge allows for that clearance.
When in doubt, measure twice.
What do you put a keg in?
Kegs are typically housed in special containers known as kegerators. Kegerators are large coolers specifically designed to hold and dispense kegs. The kegs are typically secured to the floor of the kegerator to prevent them from shifting while they are being moved.
Most kegerators are built with a durable stainless steel lining to keep the beer at a desirable temperature. Inside, you will find taps, lines, CO2 tanks, and hoses to push the beer out of the keg and into the proper glasses.
For larger events, multiple kegs and taps can easily be incorporated into a kegerator, allowing for efficient and convenient pouring of multiple different beers.
How long does a keg stay fresh?
A keg can typically stay fresh for up to 6-8 weeks, depending on the beer, as long as it is stored in a cool, dark place and the dispensing equipment is in good working condition. To ensure the freshness of the beer, the keg should remain stored at the recommended temperature for that particular beer.
Additionally, the keg should remain pressurized, as opposed to the variable atmospheric pressure often encountered with a traditional pushed tap system. A tapped keg should be consumed within three weeks to ensure the freshness of the beer.
If more time is needed before consuming the keg, it should be replaced with a new one and re-tapped.
How long before a party should you tap a keg?
It is generally recommended to start tapping a keg around one to two hours before a party begins. This will give you enough time to ensure adequate carbonation and cooling of the beer. It is also important to note that it may take some time to properly vent and clean the beer line before proper dispensing can begin.
For larger parties, it is best to tap the keg at least several hours in advance to ensure everything is ready to go when guests arrive.
How do you drink a keg?
Drinking a keg of beer is a fun and festive way to celebrate and enjoy the moment with a large group of people. Before you start drinking the keg, you’ll need the right equipment. First, you must have a keg and a tap—also known as a “keg tap”.
Additionally, you will need either a keg bucket, ice, and a stand to hold the keg or a kegerator. A kegerator is specifically designed for comfort when serving a keg and will help regulate the temperature of the beer.
When everything is in place, you’ll need to open the keg and set up the tap. Many beer distributors will set up the keg for you, but if you are unable to get this service, you’ll need to find instructions for setting up the tap correctly.
It mostly involves attaching the correct hose and clamping it to the keg. Then, you can attach the CO2 regulator and set the gas pressure at the correct psi.
Once the tap is set up, it’s time to start drinking! It is important to remember not to over-pour a glass; each beer in a keg contains approximately 14 ounces of fluid so pour only a pint or 12-ounce glass.
Also, follow the keg party etiquette—ask before you take a beer, share when possible, and clean any messes. With these simple steps and tips, you can enjoy drinking a keg like a true party pro!.
How do you fill a keg with cocktail?
Filling a keg with a cocktail can be a tricky and time consuming task, but it can also be quite rewarding. To get started, you’ll need to acquire some supplies—a keg, a carbon dioxide tank, beverage tubing, and a tap.
You’ll also want to make sure you have a shaker and anything else you will need to mix your cocktail.
Once you’ve gathered the necessary materials, begin by preparing the cocktail mixture. Make sure to mix it well and pour it into the keg, being careful not to overfill it. Next, attach the carbon dioxide tank to the keg and attach the beverage tubing to the valve.
Seal the tubbing once carbon dioxide begins to flow. Make sure to open the air relief valve in order to let out the air inside. Once the pressure is stabilized, you’ll want to disconnect the tubing and attach the tap.
You’ll also want to ensure the tap is tightly closed.
When the keg is ready to serve, open the tap and use a shaker to stir the contents of the keg. This will help ensure that the cocktail is evenly distributed. Serve the drinks and start to enjoy the fruits of your labor!.
How much is a keg of vodka?
The cost of a keg of vodka can vary widely depending on the brand and size of keg that you purchase. Generally, a full-size keg (also known as a ‘half-barrel’) contains 15.5 gallons of vodka and costs anywhere from $150 to $800.
If you purchase a smaller size keg, such as a ‘pony’ or ‘quarter’ keg which holds between 5 and 7.75 gallons, you can expect to spend between $50 and $300. The cost of a keg of vodka is also affected by the quality of the vodka.
Generally, higher quality vodka will cost more but will also be of better quality so you get what you are paying for.
